 |
บล็อกลม 3/8" Impact Wrench รุ่น RC2111
รายละเอียดสินค้า :
บล็อกลม 3/8" Impact Wrench รุ่น RC2111
150 Nm max.
3/8 impact wrench for small bolts. Regulation of the impacting power in both directions possible.
คุณลักษณะ:
1. บล็อกลม 3/8” ทำงานด้วยระบบ Single Hammer
2. แรงบิดสูงสุด 150 Nm
3. ความเร็วรอบ 10,000 rpm
4. น้ำหนัก 1.3 กิโลกรัม
5. มีปุ่มเพราะด้วยปรับทิศทาง forward-reverse และปุ่มปรับแรงบิดได้ตามประสงค์
max. pressure 6.3 bar (90 psi) IG: female thread
norms applied : noise according to ISO15744, vibration 3-axis according to ISO28927-2
| รหัส |
รายละเอียด |
| RC2111 |
• Drive : 3/8"
• Torque[Nm] : 105
• Torque, max. [Nm] : 150
• Speed [rpm] : 10000
• Weight [kg] : 1.3
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 135x165x47
• Air Consumption, average [l/min] : 150
• Air Consumption, continuous [l/min] : 410
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Impact system : SH
• Noise LpA : 92.7
• Vibration [m/s2;] : 3.75 |
|
| |
|
| |
|
 |
บล็อกลม 3/8" Impact Wrench รุ่น RC2177
รายละเอียดสินค้า :
บล็อกลม 3/8" Impact Wrench รุ่น RC2177
580 Nm max., composite, only 1.25 kg
Very handy 3/8" impact wrench.High quality composite motor housing with TPR (thermo-plastic rubber) grip areas on the handle for good tool control. With 3 position power regulator (in forward) and surprisingly low noise and low air consumption motor.
max. pressure 6.3 bar (90 psi) IG: female thread
norms applied : noise according to ISO15744, vibration 3-axis according to ISO28927-2
| รหัส |
รายละเอียด |
| RC2177 |
• Drive : 3/8"
• Torque[Nm] : 420
• Torque, max. [Nm] : 580
• Speed [rpm] : 8200
• Weight [kg] : 1.25
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 164x175x60
• Air Consumption, average [l/min] : 160
• Air Consumption, continuous [l/min] : 470
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Impact system : DP
• Noise LpA : 90
• Vibration [m/s2;] : 7.9 |
|
| |
|
| |
|
 |
Impact Socket Sets 3/8" รุ่น RS3113 Set, Short
รายละเอียดสินค้า :
Impact Socket Sets 3/8" รุ่น RS3113 Set, Short
13 piece set with impact proof sok-kets made of high steel grade (CrMo). Delivered in a tool case, with individual socket moulds marked with each size. All sockets are laser etched showing the model no. and size. Set includes socket sizes:
7/8/9/10/11/12/13/14/15/16/17/18/19 mm
| รหัส |
รายละเอียด |
| RS3113 |
Impact Socket Sets 3/8" Set, Short 13 piece set
sizes:
7/8/9/10/11/12/13/14/15/16/17/18/19 mm
|
|
| |
|
| |
|
 |
Impact Socket Sets 3/8" รุ่น RS3113D Set, long
รายละเอียดสินค้า :
Impact Socket Sets 3/8" รุ่น RS3113D Set, long
13 piece set with impact proof sok-kets made of high steel grade (CrMo). Delivered in a tool case, with individual socket moulds marked with each size. All sockets are laser etched showing the model no. and size. Set includes socket sizes:
7/8/9/10/11/12/13/14/15/16/17/18/19 mm
| รหัส |
รายละเอียด |
| RS3113D |
Impact Socket Sets 3/8" Set, long 13 piece set
sizes:
7/8/9/10/11/12/13/14/15/16/17/18/19 mm
|
|
| |
|
| |
|
 |
บล็อกลม 1/2" Mini-Impact Wrench รุ่น RC2267
รายละเอียดสินค้า :
บล็อกลม 1/2" Mini-Impact Wrench รุ่น RC2267
660 Nm max, composite, only 1.25 kg
Mini 1/2" impact wrench with high power, but low weight.High quality composite motor housing with TPR (thermo-plastic rubber) grip areas on the handle for good tool control.With 3 position power regulator (in forward) and fast air motor for quick assemblies and disassemblies also in confined areas.
| รหัส |
รายละเอียด |
| RC2267 |
• Drive : 1/2"
• Torque[Nm] : 480
• Torque, max. [Nm] : 660
• Speed [rpm] : 10200
• Weight [kg] : 1.25
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 164x175x60
• Air Consumption, average [l/min] : 180
• Air Consumption, continuous [l/min] : 510
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Impact system : DP
• Noise LpA : 93
• Vibration [m/s2;] : 6.9 |
|
| |
|
| |
|
 |
บล็อกลม 1/2" Impact Wrench รุ่น RC2205RE
รายละเอียดสินค้า :
บล็อกลม 1/2" Impact Wrench รุ่น RC2205RE
580 Nm max
Favoured standard tool, easy to switch with one hand. With 4 position torque regulator (in forward).
Model RC2205RE : 1/2" Impact wrench with a silencing exhaust hose
| รหัส |
รายละเอียด |
| RC2205RE |
• Drive : 1/2"
• Torque[Nm] : 406
• Torque, max. [Nm] : 580
• Speed [rpm] : 7800
• Weight [kg] : 2.4
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 200x210x60
• Air Consumption, average [l/min] : 130
• Air Consumption, continuous [l/min] : 350
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Impact system : PC
• Noise LpA : 87.4
• Vibration [m/s2;] : 6.71 |
|
| |
|
| |
|
 |
บล็อกลม 1/2" Impact Wrench รุ่น RC2205
รายละเอียดสินค้า :
บล็อกลม 1/2" Impact Wrench รุ่น RC2205
580 Nm max
Favoured standard tool, easy to switch with one hand. With 4 position torque regulator (in forward).
Model RC2205 : 1/2" Impact wrench without a silencing exhaust hose
| รหัส |
รายละเอียด |
| RC2205 |
• Drive : 1/2"
• Torque[Nm] : 406
• Torque, max. [Nm] : 580
• Speed [rpm] : 7800
• Weight [kg] : 2.4
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 200x210x60
• Air Consumption, average [l/min] : 130
• Air Consumption, continuous [l/min] : 350
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Impact system : PC
• Noise LpA : 87.4
• Vibration [m/s2;] : 6.71 |
|
| |
|
| |
|
 |
บล็อกลม 1/2" Impact Wrench รุ่น RC2227
รายละเอียดสินค้า :
บล็อกลม 1/2" Impact Wrench รุ่น RC2227
950 Nm max., only 2.6 kg, pin-clutch mechanism
Versatile tool with low vibration and low air consumption, equipped with a fast pin-clutch mechanism. With power regulator in forward and reverse. For fast and safe work the tool can be operated by one hand only. Difficult to reach bolts and nuts can be easily reached due to the slim front of the wrench. Equipped with an adapter to attach a silencing exhaust hose system.
| รหัส |
รายละเอียด |
| RC2227 |
• Drive : 1/2"
• Torque[Nm] : 680
• Torque, max. [Nm] : 950
• Speed [rpm] : 8700
• Weight [kg] : 2.6
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 200x194x70
• Air Consumption, average [l/min] : 190
• Air Consumption, continuous [l/min] : 570
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Impact system : PC
• Noise LpA : 95
• Vibration [m/s2;] : 5.1 |
|
| |
|
| |
|
 |
|
บล็อกลม 1/2" Impact Wrench รุ่น The BEAST RC2277
|
|
บล็อกลม 1/2" Impact Wrench รุ่น The BEAST RC2277
1250 Nm max
1/2" Composite impact wrench for universal use. Fast and high torque with forged DUOPACT mechanism. Lightweight even at this high power - only 2.0 kg. Robust forward-reverse shift/power regulator on one knob only, easy-to-read at the rear side of the tool.
Always full power in reverse - 3 position regulator for cautious forward assemblies. Air exhaust down the motor housing with swivelling air inlet - includes the option to assemble a silencing exhaust hose system. Well balanced design with insulating TPR (thermo-plastic rubber) grip areas on the handle for best control and ergonomical work.
Swivel air inlet. Mini grease plug on the front housing for easy re-greasing of the impact mechanism.
Features:
- 1/2"Composite Impact Wrench for universal use.
- fast and high torque with forged DUOPACT mechanism
- light weight only 2 kg even at this high power level
- robust forward-reverse shift/power regulator in one knob only and always full power in reverse
- air exhaust down the motor housing
- swivel air inlet
- with re-greasing plug for the impact mechanism
|
| รหัส |
รายละเอียด |
| RC2277 |
• Drive : 1/2"
• Torque[Nm] : 900
• Torque, max. [Nm] : 1250
• Speed [rpm] : 8200
• Weight [kg] : 2.0
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 194x188x70
• Air Consumption, average [l/min] : 245
• Air Consumption, continuous [l/min] : 760
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Impact system : DP
• Noise LpA : 93.0
• Vibration [m/s2;] : 9.2 |
|
| |
|
| |
|
 |
|
บล็อกลม 1/2" Impact Wrench รุ่น RC2257
|
|
บล็อกลม 1/2" Impact Wrench รุ่น RC2257
950Nm max, only 2.5 kg, DUOPACT mechanism
Robust and very compact universal tool with forged DUOPACT impact mechanism for every workshop.With power regulator in forward and reverse. For fast and safe work?the tool can be operated by one hand only. Equipped with an adapter to attach a silencing exhaust hose system.
|
| รหัส |
รายละเอียด |
| RC2257 |
• Drive : 1/2"
• Torque[Nm] : 680
• Torque, max. [Nm] : 950
• Speed [rpm] : 8950
• Weight [kg] : 2.5
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 213x194x70
• Air Consumption, average [l/min] : 200
• Air Consumption, continuous [l/min] : 610
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Impact system : DP
• Noise LpA : 94
• Vibration [m/s2;] : 6.8 |
|
| |
|
| |
|
 |
|
บล็อกลม 1/2" Impact Wrench รุ่น RC2263TL
|
|
บล็อกลม 1/2" Impact Wrench รุ่น RC2263TL
TL Torque Limited, max 90 Nm in forward, max 900 Nm in reverse
The specialist:
2263TL Torque Limited with limited torque in forward (max. 90 Nm) for safe and fast pre-tightening before using a torque wrench for final and precise torquing (as officially requested for safety). Making tyre changing more efficient and much faster while maintaining maximum safety (900 Nm max. for disassembly)
Features:
- Unique TL-System (Patent pending),limits the torque in forward mode at max. 90 Nm, irrespective of air pressure and users influence
- Avoids over-tightening the wheel nuts and avoids damage to threads,rims and brake drums (due to high screwing torque)
- Only minimal,but precise tightening with torque wrenchrequired /the nut is screwed until the signal from the torque wrench confirms the manufacturer's specs
- Exceptional power to weight ratio (only 1,9 kg)
- Rotatable air entry and exhaust through the handle
- Forward and reverse mode easy switch and?protected in the Motorplate
|
| รหัส |
รายละเอียด |
| RC2263TL |
• Drive : 1/2"
• Torque[Nm] : 90
• Torque, max. [Nm] : 900
• Speed [rpm] : 7800
• Weight [kg] : 1.9
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 190x185x70
• Air Consumption, average [l/min] : 170
• Air Consumption, continuous [l/min] : 515
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Impact system : TL
• Noise LpA : 93.3
• Vibration [m/s2;] : 13.96 |
|
| |
|
| |
|
 |
|
บล็อกลม 1/2" Impact Wrench รุ่น RC2263xi
|
|
บล็อกลม 1/2" Impact Wrench รุ่น RC2263xi
1050 Nm max, SmartDUOPACT, 1.9 kg
The Xtra innovative pack for the workshop with fast Smart DUOPACT mechanism. Your ultimate 1/2" tool with only 1,9 kg.
Features:
- One dial control for full power in reverse
- 3 power levels for assembly work
- easy to use and protected
- Low weight helps to reduce operator's fatigue.
- Outstanding power to weight ratio
- Long lasting and tough DUOPACT impact mechanism
- High tech composite housing reduces vibrations and insulates against cold air
- Swivel air inlet and in-handle exhaust
- Energy saving / low air consumption; when compared with other high torque impact tools
- Slow-start trigger mechanism for finger tip control
|
| รหัส |
รายละเอียด |
| RC2263xi |
• Drive : 1/2"
• Torque[Nm] : 900
• Torque, max. [Nm] : 1050
• Speed [rpm] : 8500
• Weight [kg] : 1.9
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 190x185x70
• Air Consumption, average [l/min] : 390
• Air Consumption, continuous [l/min] : 790
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Impact system : SmartDP
• Noise LpA : 93.7
• Vibration [m/s2;] : 9.05 |
|
| |
|
| |
|
 |
|
บล็อกลม 3/4" Impact Wrench รุ่น RC2305RE
|
|
บล็อกลม 3/4" Impact Wrench รุ่น RC2305RE
700 Nm max., DUOPACT
Small 3/4" impact wrench with 6 position torque regulator in forward.
Features:
- 3/4" Low weight-impact wrench
- Maximal reverse torque 700 Nm
- only2,9 kg
- 6-position adjuster of the impact power in forward mode, in reverse mode the full torque is applied
- Forged DUOPACT Ringhammer impact mechanism
- In / out air hose system withan integrated silencer
- 3/4withagroove retaining ringand a hole for a pin safety for a secure affixing of the socket
- Special rough surface to ensure an adequate grip
|
| รหัส |
รายละเอียด |
| RC2305RE |
• Drive : 3/4"
• Torque[Nm] : 490
• Torque, max. [Nm] : 700
• Speed [rpm] : 6300
• Weight [kg] : 2.9
• Inner Hose Diameter : 13 mm
• Dimension a x b x c [mm] : 210x195x57
• Air Consumption, average [l/min] : 185
• Air Consumption, continuous [l/min] : 510
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Impact system : DP
• Noise LpA : 91.5
• Vibration [m/s2;] : 8.22 |
|
| |
|
| |
|
 |
|
บล็อกลม 3/4" Impact Wrench รุ่น RC2315
|
|
บล็อกลม 3/4" Impact Wrench รุ่น RC2315
1500 Nm max., DUOPACT
Impact wrench for work on small trucks and vans. Comfortable handle with insulating rubber cover. Power regulator with 3 positions in forward and full power in reverse. The exhaust air is leaving the tool downwards from the handle.
Features:
- with forged double hammer impact system DUOPACT - for highest durability
- short design (242 mm)
- well balanced and practical tool
- insulated against cold and vibration thanks to rubber handle
- forward / Reverse shifting knob on the rear of the tool
- automatically full power in reverse (max. 1,500 Nm)
- 3 position torque reducer in forward (max. 1,100 Nm)
- air outlet down the handle
- slow-start trigger mechanism for finger tip speed control
|
| รหัส |
รายละเอียด |
| RC2315 |
• Drive : 3/4"
• Torque[Nm] : 1100
• Torque, max. [Nm] : 1500
• Speed [rpm] : 5600
• Weight [kg] : 4.7
• Inner Hose Diameter : 13 mm
• Dimension a x b x c [mm] : 242x230x78
• Air Consumption, average [l/min] : 340
• Air Consumption, continuous [l/min] : 990
• Air inlet [inch] (FT-female, MT-male) : 3/8" IG
• Impact system : DP
• Noise LpA : 91.1
• Vibration [m/s2;] : 9.97 |
|
| |
|
| |
|
 |
|
บล็อกลม 3/4" Impact Wrench รุ่น RC2345
|
|
บล็อกลม 3/4" Impact Wrench รุ่น RC2345
1700 Nm max., PIN CLUTCH
Well balanced lightweight Premium-Models with extra small front part allowig access to confined areas. Easy to control trigger for tightening with care. Double directional reduction of the impacting power possible by 2 position regulator.
Features:
- High performance and low weight
- Narrow and compact motor housing design for access in confined spaces
- Smooth and gradual control through advanced trigger mechanism
- Forward / Reverse and power regulator combined in one easy to use dial
- Pin clutch impact mechanism in oil bath
- Swivel air inlet avoids twisting the air hose during operation
- Ergonomic and well balanced tool housing
- In-handle exhaust
|
| รหัส |
รายละเอียด |
| RC2345 |
• Drive : 3/4"
• Torque[Nm] : 1300
• Torque, max. [Nm] : 1700
• Speed [rpm] : 6050
• Weight [kg] : 4.8
• Inner Hose Diameter : 13 mm
• Dimension a x b x c [mm] : 240x230x105
• Air Consumption, average [l/min] : 210
• Air Consumption, continuous [l/min] : 1000
• Air inlet [inch] (FT-female, MT-male) : 3/8" IG
• Impact system : PC
• Noise LpA : 95.1
• Vibration [m/s2;] : 7.07 |
|
| |
|
| |
|
 |
|
บล็อกลม 1.1/2" Impact Wrench รุ่น RC2350
|
|
บล็อกลม 1.1/2" Impact Wrench รุ่น RC2350
5500 Nm max
Bull Power Tool for extremely high torques in industrial plants like chemical and petrochemical plants as well as power plants. The impacting power can be adjusted in 4 steps for both directions.
Features:
- giant power of 5500 Nm
- 4-position impact power adjustment in forward mode
- separat forward / reverse mode adjustment
- low vibration due to symmetric impact system
|
| รหัส |
รายละเอียด |
| RC2350 |
• Drive : 1.1/2"
• Torque[Nm] : 4200
• Torque, max. [Nm] : 5500
• Speed [rpm] : 3600
• Weight [kg] : 17.7
• Inner Hose Diameter : 19 mm
• Dimension a x b x c [mm] : 520x190x123
• Air Consumption, average [l/min] : 600
• Air Consumption, continuous [l/min] : 1800
• Air inlet [inch] (FT-female, MT-male) : 1/2" IG
• Impact system : PC
• Noise LpA : 97.1
• Vibration [m/s2;] : 14.62 |
|
| |
|
| |
|
 |
|
บล็อกลม 3/4" Impact Wrench รุ่น RC2363xi with short anvil
|
|
บล็อกลม 3/4" Impact Wrench รุ่น RC2363xi with short anvil
1950 Nm max., SmartDUOPACT, composite
Extremely powerful whilst lightweight and ideally suited to provide a fast service for small trucks and vans. With ergonomic down-handle exhaust that is also available with a silencing exhaust hose system. Including a fast maintenance grease plug for regreasing of the impact system from outside. The tool has an integrated forward/reverse shift/regulator on the back with 3 power positions.
Features:
- One of the leading impact wrenches in composite design
- The 2363 reaches its astonishing 1900 Nm in a very short time while consuming less air than equivalent high torque wrenches thanks to new motor technology and increased precision
- Weight optimised construction with high quality modern materials
- Well balanced practical air tool with a robust forward/reverse and power reduction adjuster on the rear side for full power in reverse modeand 3 position power reduction in forward mode
- Exceptional power to price ratio
- DUOPACT double ring hammer impact system with improved design
- Mini-grease nipple for easy maintenance of the impact system from outside
- Cold and vibration insulating handle, air exhaust down the handle
- Trigger easy to control for soft starts
|
| รหัส |
รายละเอียด |
| RC2363xi |
• Drive : 3/4"
• Torque[Nm] : 1560
• Torque, max. [Nm] : 1950
• Speed [rpm] : 5750
• Weight [kg] : 3.5
• Inner Hose Diameter : 13 mm
• Dimension a x b x c [mm] : 228x215x93
• Air Consumption, average [l/min] : 270
• Air Consumption, continuous [l/min] : 1190
• Air inlet [inch] (FT-female, MT-male) : 3/8" IG
• Impact system : DP
• Noise LpA : 94.3
• Vibration [m/s2;] : 17.33 |
|
| |
|
| |
|
 |
|
บล็อกลม 3/4" Impact Wrench รุ่น RC2373xi with long anvil
|
|
บล็อกลม 3/4" Impact Wrench รุ่น RC2373xi with long anvil
1950 Nm max., SmartDUOPACT, composite
Extremely powerful whilst lightweight and ideally suited to provide a fast service for small trucks and vans. With ergonomic down-handle exhaust that is also available with a silencing exhaust hose system. Including a fast maintenance grease plug for regreasing of the impact system from outside. The tool has an integrated forward/reverse shift/regulator on the back with 3 power positions.
Features:
- One of the leading impact wrenches in composite design
- The 2363 reaches its astonishing 1900 Nm in a very short time while consuming less air than equivalent high torque wrenches thanks to new motor technology and increased precision
- Weight optimised construction with high quality modern materials
- Well balanced practical air tool with a robust forward/reverse and power reduction adjuster on the rear side for full power in reverse mode and 3 position?power reduction in forward mode
- Exceptional power to price ratio
- DUOPACT double ring hammer impact system with improved design
- Mini-grease nipple for easy maintenance of the impact system from outside
- Cold and vibration insulating handle, air exhaust down the handle
- Trigger easy to control for soft starts
|
| รหัส |
รายละเอียด |
| RC2373xi |
• Drive : 3/4"
• Torque[Nm] : 1560
• Torque, max. [Nm] : 1950
• Speed [rpm] : 5750
• Weight [kg] : 4.3
• Inner Hose Diameter : 13 mm
• Dimension a x b x c [mm] : 305x215x93
• Air Consumption, average [l/min] : 270
• Air Consumption, continuous [l/min] : 1190
• Air inlet [inch] (FT-female, MT-male) : 3/8" IG
• Impact system : DP
• Noise LpA : 94.3
• Vibration [m/s2;] : 17.33 |
|
| |
|
| |
|
 |
|
บล็อกลม 1" Impact Wrench รุ่น RC2403Xi
|
|
บล็อกลม 1" Impact Wrench รุ่น RC2403Xi
1950 Nm max., SmartDUOPACT, composite
Fast and very light 1" composite impact wrench like model 2363Xi.
|
| รหัส |
รายละเอียด |
| RC2403Xi |
• Drive : 1"
• Torque[Nm] : 1560
• Torque, max. [Nm] : 1950
• Speed [rpm] : 5750
• Weight [kg] : 3.6
• Inner Hose Diameter : 13 mm
• Dimension a x b x c [mm] : 228x215x93
• Air Consumption, average [l/min] : 270
• Air Consumption, continuous [l/min] : 1190
• Air inlet [inch] (FT-female, MT-male) : 3/8" IG
• Impact system : SmartDP
• Noise LpA : 94.9
• Vibration [m/s2;] : 10.73 |
|
| |
|
| |
|
 |
|
บล็อกลม 1" Impact Wrench รุ่น RC2425
|
|
บล็อกลม 1" Impact Wrench รุ่น RC2425
with short anvil, 2450 Nm max.
Group of tools with good price-power-ratio. Often favoured due to their well balanced construction and good performance. In-handle exhaust and power reducer with 3 positions for each forward and reverse.
|
| รหัส |
รายละเอียด |
| RC2425 |
• Drive : 1"
• Torque[Nm] : 1715
• Torque, max. [Nm] : 2450
• Speed[min-1] : 3200
• Weight [kg] : 9.4
• Inner Hose Diameter : 13 mm
• Dimension a x b x c [mm] : 312x270x119
• Air Consumption, average [l/min] : 370
• Air Consumption, continuous [l/min] : 1020
• Air inlet [inch] (FT-female, MT-male) : 1/2" IG
• Impact system : SH
• Noise LpA : 97.9
• Vibration [m/s2;] : 14.93 |
|
| |
|
| |
|
 |
|
บล็อกลม 1" Impact Wrench รุ่น RC2426
|
|
บล็อกลม 1" Impact Wrench รุ่น RC2426
with long anvil, 2450 Nm max.
Group of tools with good price-power-ratio. Often favoured due to their well balanced construction and good performance. In-handle exhaust and power reducer with 3 positions for each forward and reverse.
|
| รหัส |
รายละเอียด |
| RC2426 |
• Drive : 1"
• Torque[Nm] : 1715
• Torque, max. [Nm] : 2450
• Speed[min-1] : 3200
• Weight [kg] : 10.6
• Inner Hose Diameter : 13 mm
• Dimension a x b x c [mm] : 462x270x119
• Air Consumption, average [l/min] : 370
• Air Consumption, continuous [l/min] : 1020
• Air inlet [inch] (FT-female, MT-male) : 1/2" IG
• Impact system : SH
• Noise LpA : 96
• Vibration [m/s2;] : 12.8 |
|
| |
|
| |
|
 |
|
บล็อกลม 1" Impact Wrench รุ่น RC2433Xi
|
|
บล็อกลม 1" Impact Wrench รุ่น RC2433Xi
2500 Nm, 6.9 kg, SmartDUOPACT, composite
Universal power pack for truck and bus applications the lightweight front part and the composite motor housing reduce the total weight to incredible 6.9 kg especially well suited for confined areas and over-head use.
SmartDUOPACT mechanism building-up torque fast and efficiently due to internal ball bearing. The rubber coated auxiliary handle is designed for super grip and can be shifted in positions by tightening only one screw.
Exhaust down the handle and ready-equipped to attach a silencing exhaust hose system (DUS26).
|
| รหัส |
รายละเอียด |
| RC2433Xi |
• Drive : 1"
• Torque[Nm] : 1800
• Torque, max. [Nm] : 2500
• Speed[min-1] : 4000
• Weight [kg] : 6.9/7.1*
• Inner Hose Diameter : 13 mm
• Dimension a x b x c [mm] : 252x260x108
• Air Consumption, average [l/min] : 410
• Air Consumption, continuous [l/min] : 1200
• Air inlet [inch] (FT-female, MT-male) : 1/2" IG
• Impact system : SmartDP
• Noise LpA : 97
• Vibration [m/s2;] : 12.76 |
|
| |
|
| |
|
 |
|
บล็อกลม 1" Impact Wrench รุ่น RC2439 with short anvil
|
|
บล็อกลม 1" Impact Wrench รุ่น RC2439 with short anvil
2600 Nm max., Closed Hammer System
Extremely robust Premium Tools especially recommended for trucks and buses. With almost maintenance-free Closed Hammer System. The torque power can be adjusted in 3 positions in forward as well as in reverse.
Features:
- Compact design (length 272 mm)
- Ideally suited for truck and bus chassis and tire applications
- With unique long lasting and robust closed hammer system
- Second supporting handle
- Forward / reverse switch with integrated three staged power regulator
- Swivel air inlet to avoid twisting the air hose during operation
- In-handle exhaust
- Two anvil sizes available
|
| รหัส |
รายละเอียด |
| RC2439 |
• Drive : 1"
• Torque[Nm] : 1800
• Torque, max. [Nm] : 2600
• Speed[min-1] : 5000
• Weight [kg] : 10.1
• Inner Hose Diameter : 13 mm
• Dimension a x b x c [mm] : 272x279x114
• Air Consumption, average [l/min] : 280
• Air Consumption, continuous [l/min] : 1047
• Air inlet [inch] (FT-female, MT-male) : 1/2" IG
• Impact system : CH
• Noise LpA : 98.6
• Vibration [m/s2;] : 11.36 |
|
| |
|
| |
|
 |
|
บล็อกลม 1" Impact Wrench รุ่น RC2449 with long anvil
|
|
บล็อกลม 1" Impact Wrench รุ่น RC2449 with long anvil
2600 Nm max., Closed Hammer System
Extremely robust Premium Tools especially recommended for trucks and buses. With almost maintenance-free Closed Hammer System. The torque power can be adjusted in 3 positions in forward as well as in reverse.
Features:
- Compact design (length 272 mm)
- Ideally suited for truck and bus chassis and tire applications
- With unique long lasting and robust closed hammer system
- Second supporting handle
- Forward / reverse switch with integrated three staged power regulator
- Swivel air inlet to avoid twisting the air hose during operation
- In-handle exhaust
- Two anvil sizes available
- with 150 mm long anvil
- two anvil length available
|
| รหัส |
รายละเอียด |
| RC2449 |
• Drive : 1"
• Torque[Nm] : 1800
• Torque, max. [Nm] : 2600
• Speed[min-1] : 5000
• Weight [kg] : 11.5
• Inner Hose Diameter : 13 mm
• Dimension a x b x c [mm] : 442x279x114
• Air Consumption, average [l/min] : 280
• Air Consumption, continuous [l/min] : 1047
• Air inlet [inch] (FT-female, MT-male) : 1/2" IG
• Impact system : CH
• Noise LpA : 98.5
• Vibration [m/s2;] : 10.29 |
|
| |
|
| |
|
 |
|
บล็อกลม 1" Impact Wrench รุ่น RC2466 with short anvil
|
|
บล็อกลม 1" Impact Wrench รุ่น RC2466 with short anvil
2900 Nm max., Closed Hammer system, metal housing
High perfomance tools with metal housing for use at forwarding companies and for servicing fleets of trucks and buses. Extremely robust duet to almost maintenance-free Closed Hammer Sytem. The impacting power can be adjusted in 3 positions in forward as well as in reverse mode according to the application.
|
| รหัส |
รายละเอียด |
| RC2466 |
• Drive : 1"
• Torque[Nm] : 2000
• Torque, max. [Nm] : 2900
• Speed[min-1] : 5150
• Weight [kg] : 10.6
• Inner Hose Diameter : 13 mm
• Dimension a x b x c [mm] : 370x186x130
• Air Consumption, average [l/min] : 370
• Air Consumption, continuous [l/min] : 1130
• Air inlet [inch] (FT-female, MT-male) : 1/2" IG
• Impact system : CH
• Noise LpA : 100
• Vibration [m/s2;] : 6.5 |
|
| |
|
| |
|
 |
|
บล็อกลม 1" Impact Wrench รุ่น RC2476 with long anvil
|
|
บล็อกลม 1" Impact Wrench รุ่น RC2476 with long anvil
2900 Nm max., Closed Hammer system, metal housing
High perfomance tools with metal housing for use at forwarding companies and for servicing fleets of trucks and buses. Extremely robust duet to almost maintenance-free Closed Hammer Sytem. The impacting power can be adjusted in 3 positions in forward as well as in reverse mode according to the application.
|
| รหัส |
รายละเอียด |
| RC2476 |
• Drive : 1"
• Torque[Nm] : 2000
• Torque, max. [Nm] : 2900
• Speed[min-1] : 5150
• Weight [kg] : 10.6
• Inner Hose Diameter : 13 mm
• Dimension a x b x c [mm] : 520x186x130
• Air Consumption, average [l/min] : 370
• Air Consumption, continuous [l/min] : 1130
• Air inlet [inch] (FT-female, MT-male) : 1/2" IG
• Impact system : CH
• Noise LpA : 100
• Vibration [m/s2;] : 7.8 |
|
| |
|
| |
|
 |
|
บล็อกลม 1" Impact Wrench รุ่น RC2477Xi
|
|
บล็อกลม 1" Impact Wrench รุ่น RC2477Xi
2900 Nm max., 8.1 kg, DUOPACT, composite
1" Impact wrench with excellent power-weight-ratio and super high 2900 Nm max. impacting power in reverse. Premium tool for the professional tyre service on trucks and buses. The long anvil and an extra slim front with only 89 mm diameter allow easy access. Equipped with a robust 3+3 position power regulator incorporating the F/R shift. Full 360 swiveling side handle suits all working positions. Ergonomic and insulating rubber cover on both handles and the motor housing made of lightweight alloy.
|
| รหัส |
รายละเอียด |
| RC2477Xi |
• Drive : 1"
• Torque[Nm] : 2100
• Torque, max. [Nm] : 2900
• Speed[min-1] : 5900
• Weight [kg] : 8.1
• Inner Hose Diameter : 13 mm
• Dimension a x b x c [mm] : 490x165x98
• Air Consumption, average [l/min] : 300
• Air Consumption, continuous [l/min] : 920
• Air inlet [inch] (FT-female, MT-male) : 1/2" IG
• Impact system : DP
• Noise LpA : 106
• Vibration [m/s2;] : 9.8 |
|
| |
|
| |
|
 |
|
บล็อกลม 1" Impact Wrench รุ่น RC2484xi
|
|
บล็อกลม 1" Impact Wrench รุ่น RC2484xi
2800 Nm max., 8.4 kg, SmartDUOPACT, composite
Strong 1" lightweight impact wrench. The tool for the professional tyre service on trucks and buses. Easy to shift with one hand (F/R) and with integrated 3 position power adjustment for tightening (forward). In reverse it delivers automatically full power.
Features:
- Super Ergonomics for Heavy Duty Truck Applications
- excellent 2.800 Nm torque / low vibration 5.0 m/s2 due to new forged Smart-DUOPACT mechanism
- light weight 8.4 kg thanks to unique composite motor housing
- practical forward-reverse shift/power regulator easy to reach without loosening your grip
- the auxiliary handle can be used in four positions, by changing the orientation of the impact housing
- air exhaust down motor housing
- swivel air inlet
|
| รหัส |
รายละเอียด |
| RC2484xi |
• Drive : 1"
• Torque[Nm] : 1900
• Torque, max. [Nm] : 2800
• Speed[min-1] : 5000
• Weight [kg] : 8.4
• Inner Hose Diameter : 13 mm
• Dimension a x b x c [mm] : 530x178x94
• Air Consumption, average [l/min] : 410
• Air Consumption, continuous [l/min] : 1200
• Air inlet [inch] (FT-female, MT-male) : 1/2" IG
• Impact system : SmartDP
• Noise LpA : 95.3
• Vibration [m/s2;] : 14.3 |
|
| |
|
| |
|
 |
|
ประแจลม 1/4" Ratchet รุ่น RC3000 with short front
|
|
ประแจลม 1/4" Ratchet รุ่น RC3000 with short front
motor 30 Nm max.
The right ratchet for any application. With short (180 mm) design. Includes an adapter for attaching an silencing exhaust hose system.
Features:
- max.torque 30 Nm
- Forward / reverse mode switch on the ratchet head
- Exhaust through the handle to the rear
- Accessory:in / out air hose system
|
| รหัส |
รายละเอียด |
| RC3000 |
• Drive : 1/4"
• Torque[Nm] : 20
• Torque, max. [Nm] : 30
• Speed[min-1] : 230
• Weight [kg] : 0.55
• Inner Hose Diameter : 13 mm
• Dimension a x b x c [mm] : 180x35x31
• Air Consumption, average [l/min] : 100
• Air Consumption, continuous [l/min] : 300
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Duty evel extras : 1
• Noise LpA : 81.2
• Vibration [m/s2;] : 83.2 |
|
| |
|
| |
|
 |
|
ประแจลม 1/4" Ratchet รุ่น RC3001
|
|
ประแจลม 1/4" Ratchet รุ่น RC3001
only 140 mm
Mini ratchet for use in confined areas. Fast assembly and disassembly with 270 rpm, 30 Nm max. motor torque. Anti-slip coated handle, insulating against cold with rear exhaust.
|
| รหัส |
รายละเอียด |
| RC3001 |
• Drive : 1/4"
• Torque[Nm] : 25
• Torque, max. [Nm] : 30
• Speed[min-1] : 270
• Weight [kg] : 0.44
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 140x35x30
• Air Consumption, average [l/min] : 115
• Air Consumption, continuous [l/min] : 490
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Duty evel extras : 2
• Noise LpA : 91.8
• Vibration [m/s2;] : 92.2 |
|
| |
|
| |
|
 |
|
ประแจลม 1/4" Ratchet รุ่น RC3015 with long front
|
|
ประแจลม 1/4" Ratchet รุ่น RC3015 with long front
motor 30 Nm max.
The right ratchet for any application. With alternatively long (205 mm) design. Includes an adapter for attaching an silencing exhaust hose system.
Features:
- max.torque 30 Nm
- with extended neck
- Forward / reverse mode switch on the ratchet head
- Exhaust through the handle to the rear
- Accessory:in / out air hose system
|
| รหัส |
รายละเอียด |
| RC3015 |
• Drive : 1/4"
• Torque[Nm] : 20
• Torque, max. [Nm] : 30
• Speed[min-1] : 230
• Weight [kg] : 0.55
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 205x35x31
• Air Consumption, average [l/min] : 100
• Air Consumption, continuous [l/min] : 300
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Duty evel extras : 1
• Noise LpA : 82.4
• Vibration [m/s2;] : 82.1 |
|
| |
|
| |
|
 |
|
ประแจลม 1/4" Ratchet รุ่น RC3060
|
|
ประแจลม 1/4" Ratchet รุ่น RC3060
closed head design, motor 45 Nm max., composite
Flat, small ratchet head (32 mm) for confined areas. The closed head design with 2 grease nipples makes regreasing of all ratchet head parts from outside easy and keeps dirt off the mechanism for an extended durability of the ratchet . Pivotable air outlet, keeps air away from work, with the possibility to connect a silencing exhaust hose system. Insulated handle with integrated power adjustment.
Features:
- Composite Housing
- New patented ratchet head
- Comfortable to use; Ergonomically formed grip and insulating housing
- Max.45 Nm output through innovative robust ratchet mechanism (patented)
- Narrow ratchet head (32 mm)
- Two small grease fittings for preventive maintenance of ratchet head (grease gun 8150 recommended)
- Exhaust air outlet can be turned to direct exhaust away from hand and operator
- Speed regulator allows immediate adjustments by hand
|
| รหัส |
รายละเอียด |
| RC3060 |
• Drive : 1/4"
• Torque[Nm] : 20
• Torque, max. [Nm] : 45
• Speed[min-1] : 250
• Weight [kg] : 0.65
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 205x42x32
• Air Consumption, average [l/min] : 65
• Air Consumption, continuous [l/min] : 200
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Duty evel extras : 4 GK
• Noise LpA : 89.3
• Vibration [m/s2;] : 88.1 |
|
| |
|
| |
|
 |
|
ประแจลม 3/8" Ratchet รุ่น RC3005 with short front
|
|
ประแจลม 3/8" Ratchet รุ่น RC3005 with short front
motor 30 Nm max.
The right ratchet for any application. With short (180 mm) design. Includes an adapter for attaching an silencing exhaust hose system.
Features:
- Max.?Torque 30 Nm
- Mini 3/8" ratchet
- Forward / reverse mode switch on the ratchet head
- Exhaust through the handle to the rear
- Accessory:in / out air hose system
|
| รหัส |
รายละเอียด |
| RC3005 |
• Drive : 3/8"
• Torque[Nm] : 20
• Torque, max. [Nm] : 30
• Speed[min-1] : 230
• Weight [kg] : 0.55
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 180x35x33
• Air Consumption, average [l/min] : 100
• Air Consumption, continuous [l/min] : 300
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Duty evel extras : 1
• Noise LpA : 85.5
• Vibration [m/s2;] : 87.5 |
|
| |
|
| |
|
 |
|
ประแจลม 3/8" Ratchet รุ่น RC3010 with long front
|
|
ประแจลม 3/8" Ratchet รุ่น RC3010 with long front
motor 30 Nm max.
The right ratchet for any application. With alternatively long (205 mm) design. Includes an adapter for attaching an silencing exhaust hose system.
Features:
- Max.torque 30 Nm
- Mini Ratchet 3/8"
- Forward / reverse mode switch on the ratchet head
- Exhaust through the handle to the rear
- Accessory:in / out air hose system
- with extended neck
|
| รหัส |
รายละเอียด |
| RC3010 |
• Drive : 3/8"
• Torque[Nm] : 20
• Torque, max. [Nm] : 30
• Speed[min-1] : 230
• Weight [kg] : 0.55
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 205x35x33
• Air Consumption, average [l/min] : 100
• Air Consumption, continuous [l/min] : 300
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Duty evel extras : 1
• Noise LpA : 84.2
• Vibration [m/s2;] : 83.2 |
|
| |
|
| |
|
 |
|
ประแจลม 3/8" Ratchet รุ่น RC3200
|
|
ประแจลม 3/8" Ratchet รุ่น RC3200
motor 60 Nm max.
Series of standard ratchets with exhaust towards the front and good grip handle structure.
Features:
- Max.torque 60 Nm
- 3/8" Ratchet
- Forward / reverse mode switch on the ratchet head
- Exhaust to the front
|
| รหัส |
รายละเอียด |
| RC3200 |
• Drive : 3/8"
• Torque[Nm] : 40
• Torque, max. [Nm] : 60
• Speed[min-1] : 160
• Weight [kg] : 1.20
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 255x47x42
• Air Consumption, average [l/min] : 170
• Air Consumption, continuous [l/min] : 465
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Duty evel extras : 1
• Noise LpA : 90.8
• Vibration [m/s2;] : 92.8 |
|
| |
|
| |
|
 |
|
ประแจลม 3/8" Ratchet รุ่น RC3260
|
|
ประแจลม 3/8" Ratchet รุ่น RC3260
closed head design, motor 45 Nm max., composite
Flat, small ratchet head (32 mm) for confined areas. The closed head design with 2 grease nipples makes regreasing of all ratchet head parts from outside easy and keeps dirt off the mechanism for an extended durability of the ratchet. Pivotable air outlet, keeps air away from work, with the possibility to connect a silencing exhaust hose system. Insulated handle with integrated power adjustment.
Features:
- Composite Housing
- New patented ratchet head
- Easy to use; Ergonomically formed grip and insulating housing
- Max.45 Nm output through innovative robust ratchet mechanism (patented)
- Narrow ratchet head (32 mm)
- Two small grease fittings for preventive maintenance of ratchet head? (grease gun 8150 recommended)
- Exhaust air outlet can be turned to direct exhaust away from hand and operator
- Speed regulator allows immediate adjustments by hand
|
| รหัส |
รายละเอียด |
| RC3260 |
• Drive : 3/8"
• Torque[Nm] : 20
• Torque, max. [Nm] : 45
• Speed[min-1] : 250
• Weight [kg] : 0.65
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 205x42x34
• Air Consumption, average [l/min] : 65
• Air Consumption, continuous [l/min] : 200
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Duty evel extras : 4 GK
• Noise LpA : 92.5
• Vibration [m/s2;] : 93.4 |
|
| |
|
| |
|
 |
|
ประแจลม 3/8" Ratchet รุ่น RC3630
|
|
ประแจลม 3/8" Ratchet รุ่น RC3630
motor 90 Nm max
Proven air ratchets with rear exhaust and the possibility to attach a silencing exhaust hose system - which all RE-types include already as well as a protective rubber cap on the ratchet head. The motor housing with its flattened sides has a perfect grip to allow best control of the tool.
|
| รหัส |
รายละเอียด |
| RC3630 |
• Drive : 3/8"
• Torque[Nm] : 60
• Torque, max. [Nm] : 90
• Speed[min-1] : 170
• Weight [kg] : 1.25
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 273x40x45
• Air Consumption, average [l/min] : 170
• Air Consumption, continuous [l/min] : 460
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Duty evel extras : 2
• Noise LpA : 85.9
• Vibration [m/s2;] : 82.8 |
|
| |
|
| |
|
 |
|
ประแจลม 1/2" Ratchet รุ่น RC3100
|
|
ประแจลม 1/2" Ratchet รุ่น RC3100
motor 60 Nm max
Series of standard ratchets with exhaust towards the front and good grip handle structure
Features:
- max.torque 60 Nm
- ratchet
- Forward / reverse mode switch on the ratchet head
- Exhaust to the front
- Model 3101, Set with 3/8" Ratchet 3200
|
| รหัส |
รายละเอียด |
| RC3100 |
• Drive : 1/2"
• Torque[Nm] : 40
• Torque, max. [Nm] : 60
• Speed[min-1] : 160
• Weight [kg] : 1.20
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 255x47x46
• Air Consumption, average [l/min] : 170
• Air Consumption, continuous [l/min] : 465
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Duty evel extras : 1
• Noise LpA : 93.2
• Vibration [m/s2;] : 95.2 |
|
| |
|
| |
|
 |
|
ประแจลม 1/2" Ratchet รุ่น RC3600RE
|
|
ประแจลม 1/2" Ratchet รุ่น RC3600RE
Motor 90 Nm max
Proven air ratchets with rear exhaust and the possibility to attach a silencing exhaust hose system - which all RE-types include already as well as a protective rubber cap on the ratchet head. The motor housing with its flattened sides has a perfect grip to allow best control of the tool.
Features:
- with high quality, robust mechanism and protective handle
- Easy to use and built for the highest demands
- Sensitive throttle lever for careful fastening
- Textured grip and heightened body to prevent slippage
- Max torque 90 Nm
- With in / out air hose system
- Accessory: cold insulater model KS4
|
| รหัส |
รายละเอียด |
| RC3600RE |
• Drive : 1/2"
• Torque[Nm] : 60
• Torque, max. [Nm] : 90
• Speed[min-1] : 170
• Weight [kg] : 1.25
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 275x43x49
• Air Consumption, average [l/min] : 170
• Air Consumption, continuous [l/min] : 460
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Duty evel extras : 2
• Noise LpA : 85.4
• Vibration [m/s2;] : 85.5 |
|
| |
|
| |
|
 |
|
ประแจลม 1/2" Ratchet รุ่น RC3607
|
|
ประแจลม 1/2" Ratchet รุ่น RC3607
motor 90 Nm max., composite+rubber
Ergonomic and powerful ratchet wrench for every workshop. New and cold-insulating composite handle with integrated rubber patches for better grip. Start lever sinks snugly into housing. Simple to re-grease the mechanism through the mini-grease plug in the ratchet head. The introduced grease protects the mechanism from abrasive dirt and dust? penetrating the ratchet head and reduces wear. Due to the rear exhaust design a silencing exhaust hose can be attached (DUS 21).
|
| รหัส |
รายละเอียด |
| RC3607 |
• Drive : 1/2"
• Torque[Nm] : 60
• Torque, max. [Nm] : 90
• Speed[min-1] : 170
• Weight [kg] : 0.9
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 2270x44x49
• Air Consumption, average [l/min] : 170
• Air Consumption, continuous [l/min] : 460
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Duty evel extras : 2
• Noise LpA : 88.2
• Vibration [m/s2;] : 87.8 |
|
| |
|
| |
|
 |
|
ประแจลม 1/2" Ratchet รุ่น RC3700
|
|
ประแจลม 1/2" Ratchet รุ่น RC3700
motor torque 130 Nm max., hand torque over 250 Nm, DuoPawl
Fastest ratchet in the RODCRAFT program with extremely high power of the motor - by hand you can even torque more than 250 Nm almost like using a spanner. The Premium model 3700 combines all latest RODCRAFT improvements:
DUO-PAWL double ratchet pawl mechanism with 3-point-spring suspension for extreme torque and smooth operation with symmetrical blocking system. The closed head design keeps dirt off the mechanism and the 3 mini-grease nipples offer easy and fast maintenance from outside. The forged head and its construction ensure optimum stability and small dimensions for working with high power even in confined areas. The cold and vibration insulated handle is equipped with a swiveling exhaust ring avoiding any disturbance from the exhausted air flow.
Features:
- Powerful and long-lasting
Incredibly robust for hand ratcheting with amtorque of more than 250 Nm
premium-motor for powerful tightening up to 130 Nm
patented closed head design out of solid forged material,
protecting the ratchet mechanism against dirt and dust. Due to the shape and quality,
the forged head withstands even high forces caused by breaking loose / tightening larger bolts and nuts.
- DUO-PAWL double pawl system the double and symmetrical ratchet mechanism
ensures more precision and stability to pawls and yoke enhancing the lifetime of the ratchet
excenter shaft with multiple bearings
three mini-grease nipples for practical greasing from outside
simple and directly where grease is important please use our grease pump model 8160
- 90% faster than ordinary ratchets with speed regulator on the handle. Fastening / loosening threaded connections in a fraction of the time used normally.
- Comfortable
moulded composite handle for best grip and protection against cold and vibration.
sturdy but light motor housing made of special aluminium alloy
good for working in any position, the rotating ring directs exhaust where it is least disturbing
flat trigger button for easy to control start and practical for working in limited space
- For all bolts and nuts that require higher torque without impacting like brakes, automatic gearboxes, motors.
Practical accessories: Mini grease gun 8160 and 8150 for a precise greasing of the ratchet's head, 1/2" socket set (long, short, Torx), Extensions, Bit holders
|
| รหัส |
รายละเอียด |
| RC3700 |
• Drive : 1/2"
• Torque[Nm] : 130 250(H)
• Torque, max. [Nm] : 130
• Speed[min-1] : 320
• Weight [kg] : 1.6
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 312x52x52
• Air Consumption, average [l/min] : 130
• Air Consumption, continuous [l/min] : 830
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Duty evel extras : 4 GK DuoPawl
• Noise LpA : 92
• Vibration [m/s2;] : 93.7 |
|
| |
|
| |
|
 |
|
สว่านลม 3/8" (10 mm) รุ่น RC4100
|
|
สว่านลม 3/8" (10 mm) รุ่น RC4100
non-reversible
Very handy drill with good price/performance ratio including a R?HM - quick chuck up to 10 mm (3/8"). Short design
Features:
- Speed 2,200 rpm
- air exhaust down the handle
- standard with quick change drill chuck
- also available with key chuck
- weight only 0.95 kg
- Max drill capacity 10 mm
|
| รหัส |
รายละเอียด |
| RC4100 |
• Drill diameter1 : SF 1 - 10
• Power[W] : 500
• Speed[min-1] : 2200
• Weight[kg] : 0.95
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 193x132x42
• Air Consumption, average [l/min] : 350
• Air Consumption, continuous [l/min] : 470
• Air inlet [inch] : 1/4" IG
• Duty level : 2
• Noise LpA [dB(A)] : 86.7
• Vibration [m/s2] : 3.19 |
|
| |
|
| |
|
 |
|
สว่านลม 1/4" (6.5 mm) รุ่น RC4105
|
|
สว่านลม 1/4" (6.5 mm) รุ่น RC4105
reversible, composite + rubber
Ergonomic and lightweight drill with insulating composite handle equipped with integrated rubber contact surfaces. Precise to regulate the speed. Well suited for use with balancers/hose balancers due to its 3 connecting possibilities for compressed air supply.
Features:
- lightweight composite housing
- comfortable grip
- insulated / rubber coated
- low noise
- silenced / down handle exhaust
- easy control
- slow start sensitive trigger
- versatile for work place design
- multi position air inlets (please use our air valve model AR1 or our swivel connector to regulate the air flow while using the extra inlets)
- hanger for balancer
- practical thumb switch for forward / reverse
- fast speed for small drills up to 6.5 mm
|
| รหัส |
รายละเอียด |
| RC4105 |
• Drill diameter1 : ZF 1 - 6.5
• Power[W] : 180
• Speed[min-1] : 3000
• Weight[kg] : 0.58
• Inner hose diameter [mm] : 6 - 9
• Dimension a x b x c [mm] : 165x160x38
• Air Consumption, average [l/min] : 330
• Air Consumption, continuous [l/min] : 440
• Air inlet [inch] : 1/4" IG
• Duty level : 3
• Noise LpA [dB(A)] : 71.3
• Vibration [m/s2] : 3.24 |
|
| |
|
| |
|
 |
|
สว่านลม 3/8" (10 mm) รุ่น RC4107
|
|
สว่านลม 3/8" (10 mm) รุ่น RC4107
Reversible, composite + rubber
Very ergonomic and lightweight tool with anti-slip rubber patches integrated in the handle. Precisely adjustable speed for cautious start-ups. With silencer and multiple connection possibilities for the compressed air practical according to the direction of use as well as the way of suspension (hose balancer / balancer and spiral hose / hand held). Equipped with high quality key-less chuck from RHM.
|
| รหัส |
รายละเอียด |
| RC4107 |
• Drill diameter1 : SF 1 - 10
• Power[W] : 380
• Speed[min-1] : 2200
• Weight[kg] : 0.93
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 220x100x50
• Air Consumption, average [l/min] : 480
• Air Consumption, continuous [l/min] : 650
• Air inlet [inch] : 1/4" IG
• Duty level : 3
• Noise LpA [dB(A)] : 81.3
• Vibration [m/s2] : 3.06 |
|
| |
|
| |
|
 |
|
สว่านลม 3/8" (10 mm) รุ่น RC4500
|
|
สว่านลม 3/8" (10 mm) รุ่น RC4500
reversible
Compact tool with forward/reverse switch on handle and equipped with RHM-quick chuck up to 10 mm (3/8").
Features:
- speed 2,000 rpm
- air exhaust down the handle
- standard with quick change drill chuck
- also available with key chuck
- weight only 1.15 kg
- Max drill capacity 10 mm
|
| รหัส |
รายละเอียด |
| RC4500 |
• Drill diameter1 : SF 1 - 10
• Power[W] : 500
• Speed[min-1] : 2200
• Weight[kg] : 1.15
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 192x152x42
• Air Consumption, average [l/min] : 460
• Air Consumption, continuous [l/min] : 620
• Air inlet [inch] : 1/4" IG
• Duty level : 2
• Noise LpA [dB(A)] : 92.7
• Vibration [m/s2] : 3.16 |
|
| |
|
| |
|
 |
|
สว่านลม 3/8" (10 mm) รุ่น RC4600
|
|
สว่านลม 3/8" (10 mm) รุ่น RC4600
silenced non-reversible
High quality drill with double front bearing, 3-planet-gear and down-handle exhaust with muffler. Equipped with 10 mm (3/8") quality RHM - quick key-less chuck.
Features:
- max.drill capacity10 mm
- Exhaust through the handle to the rear
- Standard with key-less chuck
- Also available with key chuck
- Accessory: handle insulation Model KS 4
|
| รหัส |
รายละเอียด |
| RC4600 |
• Drill diameter1 : SF 1 - 10
• Power[W] : 500
• Speed[min-1] : 2000
• Weight[kg] : 1.00
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 225x40x42
• Air Consumption, average [l/min] : 380
• Air Consumption, continuous [l/min] : 510
• Air inlet [inch] : 1/4" IG
• Duty level : 2
• Noise LpA [dB(A)] : 81.3
• Vibration [m/s2] : 3.37 |
|
| |
|
| |
|
 |
|
สว่านลม 1/4" (6.5 mm) รุ่น RC4607
|
|
สว่านลม 1/4" (6.5 mm) รุ่น RC4607
Silenced non-reversible, Composite
High quality drill with double front bearing, 3-planet-gear and down-handle exhaust with muffler. Equipped with 10 mm (3/8") quality RHM - quick key-less chuck.
Model 4607 with cold-insulating composite handle with integrated rubber patches for better grip.
Features:
- max.drill capacity 10 mm
- Exhaust through the handle to the rear
- Standard with key-less chuck
- Also available with key chuck
- Accessory: handle insulation Model KS 4
|
| รหัส |
รายละเอียด |
| RC4607 |
• Drill diameter1 : SF 1 - 10
• Power[W] : 500
• Speed[min-1] : 2000
• Weight[kg] : 1.00
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 225x40x42
• Air Consumption, average [l/min] : 380
• Air Consumption, continuous [l/min] : 510
• Air inlet [inch] : 1/4" IG
• Duty level : 2
• Noise LpA [dB(A)] : 81.3
• Vibration [m/s2] : 3.37 |
|
| |
|
| |
|
 |
|
สว่านลม 3/8" (10 mm) รุ่น RC4650
|
|
สว่านลม 3/8" (10 mm) รุ่น RC4650
reversible
Slim tool with adapter to attach a silencing exhaust hose system. With RHM - quick key-less chuck up to 10 mm (3/8") (male thread on tool 3/8"-24).
Features:
- max.drill capacity10 mm
- compact design with an extra low head and 10 mm chuck
- Exhaust through the handle to the rear
|
| รหัส |
รายละเอียด |
| RC4650 |
• Drill diameter1 : SF 1 - 10
• Power[W] : 500
• Speed[min-1] : 1500
• Weight[kg] : 1.10
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 210x42x84
• Air Consumption, average [l/min] : 330
• Air Consumption, continuous [l/min] : 450
• Air inlet [inch] : 1/4" IG
• Duty level : 2
• Noise LpA [dB(A)] : 89.9
• Vibration [m/s2] : 3.14 |
|
| |
|
| |
|
 |
|
สว่านลม 1/2" (13 mm) รุ่น RC4300
|
|
สว่านลม 1/2" (13 mm) รุ่น RC4300
Silenced, non-reversible
Compact 13 mm (1/2?) Drill with down-handle exhaust muffler.Equipped with quality R?HM - quick key-less chuck, robust 3-planet-gear and double front bearing.
Features:
- 2200 RPM,Length 175 mm,height 170 mm
- Knob for an unrestricted speed adjustment
|
| รหัส |
รายละเอียด |
| RC4300 |
• Drill diameter1 : SF 1.5 - 13
• Power[W] : 500
• Speed[min-1] : 2000
• Weight[kg] : 1.25
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 175x170x44
• Air Consumption, average [l/min] : 360
• Air Consumption, continuous [l/min] : 480
• Air inlet [inch] : 1/4" IG
• Duty level : 2
• Noise LpA [dB(A)] : 87
• Vibration [m/s2] : 3.17 |
|
| |
|
| |
|
 |
|
สว่านลม 1/2" (13 mm) รุ่น RC4400
|
|
สว่านลม 1/2" (13 mm) รุ่น RC4400
non-reversible
Powerful 13 mm (1/2") drill with double planetary gear and low speed, also good for mixing applications. With quality RHM - quick key-less chuck and detachable side handle.
Features:
- max.drill capacity 13 mm
- with an adjustable side handle
- two planetary gears for low speed and high torque
- Exhaust through the handle to the rear
- Standard with key-less chuck
- Also available with key chuck
|
| รหัส |
รายละเอียด |
| RC4400 |
• Drill diameter1 : SF 1.5 - 13
• Power[W] : 500
• Speed[min-1] : 500
• Weight[kg] : 1.65
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 235x147x44
• Air Consumption, average [l/min] : 400
• Air Consumption, continuous [l/min] : 530
• Air inlet [inch] : 1/4" IG
• Duty level : 3
• Noise LpA [dB(A)] : 82.3
• Vibration [m/s2] : 4.51 |
|
| |
|
| |
|
 |
|
สว่านลม 1/2" (13 mm) รุ่น RC4550
|
|
สว่านลม 1/2" (13 mm) รุ่น RC4550
reversible
Reversible 13 mm (1/2") drill with double 3-planet-gear and double front bearing for tough applications. With precise R?HM - quick key-less chuck and detachable side handle.
Features:
- max.?drill capacity 13 mm
- forward and reverse modes
- Exhaust through the handle to the rear
- with an adjustable side handle
- standard with key-less chuck
- Also available with key chuck
|
| รหัส |
รายละเอียด |
| RC4550 |
• Drill diameter1 : SF 1.5 - 13
• Power[W] : 500
• Speed[min-1] : 800
• Weight[kg] : 1.40
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 220x150x42
• Air Consumption, average [l/min] : 430
• Air Consumption, continuous [l/min] : 585
• Air inlet [inch] : 1/4" IG
• Duty level : 3
• Noise LpA [dB(A)] : 91.9
• Vibration [m/s2] : 4.51 |
|
| |
|
| |
|
 |
|
ไขควงลม รุ่น RC4700 (Pistol type Screwdriver)
|
|
ไขควงลม รุ่น RC4700 (Pistol type Screwdriver)
up to 20 Nm, internally adjustable, 1800 rpm
Favoured short screwdriver with high speed.
Screwdriver with a 1/4"quick change chuck and bit holder.As a bit holder we recommend our magnetic holder M 10-A. The machine starts when the trigger ispulled and stops with the slip clutch. The 4700 also has an internal torque adjuster. The exhaust goes through the handle to the rear.
|
| รหัส |
รายละเอียด |
| RC4700 |
• Torque[Nm] : 8 - 20
• Bit Drive : 1/4"
• Adjustment : Interne
• Speed[rpm] : 1800
• Weight[kg] : 1.15
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 210x150x42
• Air Consumption, average [l/min] : 430
• Air Consumption, continuous [l/min] : 585
• Air inlet [inch] : 1/4" IG
• Stop/Start : R/D
• Noise LpA [dB(A)] : 88.6
• Vibration [m/s2] : <2.5 |
|
| |
|
| |
|
 |
|
ไขควงลม รุ่น RC4780 (Pistol type Screwdriver)
|
|
ไขควงลม รุ่น RC4780 (Pistol type Screwdriver)
up to 45 Nm, externally adjustable
Versatile smooth running tool with enourmous power. Easy to reach forward/reverse shift, which can be operated by left and right handed persons.
Features:
- 1/4" screwdriver with key-less chuck
- Torque adjustment ring
- As a bit holder we recommend our magnetic holder M 10-A
- Exhaust through the handle to the rear
- with push clutch
|
| รหัส |
รายละเอียด |
| RC4780 |
• Torque[Nm] : 4 - 45
• Bit Drive : 1/4"
• Adjustment : externe
• Speed[rpm] : 1100
• Weight[kg] : 1.45
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 245x155x43
• Air Consumption, average [l/min] : 430
• Air Consumption, continuous [l/min] : 585
• Air inlet [inch] : 1/4" IG
• Stop/Start : R/D
• Noise LpA [dB(A)] : 89.7
• Vibration [m/s2] : <2.5 |
|
| |
|
| |
|
 |
|
ไขควงลม รุ่น RC4784 (Pistol type Screwdriver)
|
|
ไขควงลม รุ่น RC4784 (Pistol type Screwdriver)
lightweight composite, external adjustment, up to 15 Nm
Super lightweight, ergonomic tool with precisely adjustable speed up to 1770 rpm. Well suited also for use with balancer/hose balancer the tool offers 3 possible connections to compressed air supply.
Features:
- lightweight composite housing
- comfortable grip
- insulated / rubber coated
- silenced / down handle exhaust
- simple setting of the shut-off torque from outside on front ring
- easy control
- slow start sensitive trigger
- versatile for work place design
- multi position air inlets (please use our air valve model AR1 or our swivel connector to regulate the air flow while using the extra inlets)
- hanger for balancer
- practical thumb switch for forward / reverse
- high speed 1770 rpm
|
| รหัส |
รายละเอียด |
| RC4784 |
• Torque[Nm] : 1 - 15
• Bit Drive : 1/4"
• Adjustment : externe
• Speed[rpm] : 1770
• Weight[kg] : 0.92
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 165x160x45
• Air Consumption, average [l/min] : 440
• Air Consumption, continuous [l/min] : 595
• Air inlet [inch] : 1/4" IG
• Stop/Start : R/M
• Noise LpA [dB(A)] : 80.3
• Vibration [m/s2] : <2.5 |
|
| |
|
| |
|
 |
|
ไขควงลม รุ่น RC4760 (Straight screwdrivers)
|
|
ไขควงลม รุ่น RC4760 (Straight screwdrivers)
up to 17 Nm, internally adjustable, 1800 rpm
Large straight tool, for fast assembly. Easy to reach forward/reverse shift which can be locked in reverse for longer disassemblies.
Features:
- Screwdriver with a 1/4" key-less chuck
- internal torque adjuster
- As a bit holder we recommend our magnetic holder M 10-A
- Exhaust through the handle to the rear
- Slidding clutch
- Starts when trigger is pulled
|
| รหัส |
รายละเอียด |
| RC4760 |
• Torque[Nm] : 4 - 17
• Bit Drive : 1/4"
• Adjustment : lnterne
• Speed[rpm] : 1800
• Weight[kg] : 1.10
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 242x42
• Air Consumption, average [l/min] : 350
• Air Consumption, continuous [l/min] : 470
• Air inlet [inch] : 1/4" IG
• Stop/Start : R/H
• Noise LpA [dB(A)] : 88.7
• Vibration [m/s2] : <2.5 |
|
| |
|
| |
|
 |
|
สกัดลม รุ่น RC5100
|
|
สกัดลม รุ่น RC5100
hexagon shank 11 mm, 6 Joule
Compact chisel hammer with adjustable blow power. Including a chisel retainer spring model RC70. For use with chisels having a 11.0 mm hexagon shank.
Features:
- 11 mm hexagonal chisel hammer
- Impact speed regulator
- Standard with RC 70 retainer spring
- Impact speed: 3000 l/min
|
| รหัส |
รายละเอียด |
| RC5100 |
• Chisel insert [mm][in] : 11.01 (0.433)
• Piston Stroke/diam.[mm] : 60/19
• Blows[min-1] : 3000
• Weight[kg] : 1.50
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 200x160x39
• Air Consumption, average [l/min] : 270
• Air Consumption, continuous [l/min] : 400
• Air inlet [inch] : 1/4" IG
• Blow energy : 6
• Noise LpA [dB(A)] : 94.8
• Vibration [m/s2] : 13.2 |
|
| |
|
| |
|
 |
|
สกัดลม รุ่น RC5180
|
|
สกัดลม รุ่น RC5180
low vibration, 8 Joule
Vibration reduced chisel hammer well balanced and powerful for less tiring work. Suited for operation on sheet metal, metal and stone/concrete. This model is a comfortable and ergonomic alternative using chisels with 11,0 mm hexagonal shaft like in many of our sets. Including chisel retainer spring RC70.
Features:
- low vibration
- balanced construction
- good grip due to structured surface
- with 11 mm hexagonal chisel insert end
|
| รหัส |
รายละเอียด |
| RC5180 |
• Chisel insert [mm][in] : 11.01 (0.433)
• Piston Stroke/diam.[mm] : 81/19
• Blows[min-1] : 2500
• Weight[kg] : 2.40
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 245x162x39
• Air Consumption, average [l/min] : 250
• Air Consumption, continuous [l/min] : 362
• Air inlet [inch] : 1/4" IG
• Blow energy : 8
• Noise LpA [dB(A)] : 100
• Vibration [m/s2] : 3.2 |
|
| |
|
| |
|
 |
|
สกัดลม Set with hexagon chisels (11 mm) รุ่น RC5120
|
|
สกัดลม Set with hexagon chisels (11 mm) รุ่น RC5120
car body / metal
Set with hexagon chisels (11 mm):
1 chisel Hammer RC5100
with spring retainer RC70
1 deriveting chisel RC22S
1 welding spot splitting chisel RC19S
1 double blade cutting chisel RC60S
1 flat chisel RC20S
1 curve splitting chisel RC18S
1 tool box
|
| รหัส |
รายละเอียด |
| RC5120 |
• Chisel insert [mm][in] : 11.01 (0.433)
• Piston Stroke/diam.[mm] : 60/19
• Blows[min-1] : 3000
• Weight[kg] : 1.50
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 200x160x39
• Air Consumption, average [l/min] : 270
• Air Consumption, continuous [l/min] : 400
• Air inlet [inch] : 1/4" IG
• Blow energy : 6
• Noise LpA [dB(A)] : 94.8
• Vibration [m/s2] : 13.2 |
|
| |
|
| |
|
 |
|
Riveting set for truck brake pads รุ่น RC5160
|
|
สกัดลม Riveting set for truck brake pads รุ่น RC5160
(set hexagon 11 mm)
Riveting Set for Truck Brake Pads
For riveting and removal of hollow aluminium and copper rivets.
Standard for rivet size 8 mm (also chisels available for 6 and 10 mm) with hexagonal shaft chisels (11 mm):
1 chisel hamer RC5100
with spring retainer RC70
1 rivet head RC40S-8 mm
(6 / 10 mm*)
1 deriveter chisel RC41S-8 mm
(10 mm*)
1 counter holder RC42S-8 mm
1 tool box
|
| รหัส |
รายละเอียด |
| RC5160 |
• Chisel insert [mm][in] : 11.01 (0.433)
• Piston Stroke/diam.[mm] : 60/19
• Blows[min-1] : 3000
• Weight[kg] : 1.50
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 200x160x39
• Air Consumption, average [l/min] : 270
• Air Consumption, continuous [l/min] : 400
• Air inlet [inch] : 1/4" IG
• Blow energy : 6
• Noise LpA [dB(A)] : 94.8
• Vibration [m/s2] : 13.2 |
|
| |
|
| |
|
 |
|
สกัดลม Set with hexagon chisels (11 mm) รุ่น RC5150
|
|
สกัดลม Set with hexagon chisels (11 mm) รุ่น RC5150
Stone/concrete
Set with hexagon chisels (11 mm):
1 chisel Hammer RC5100
with steel retainer RC76-1
1 pointed chisel 240 mm SS10
1 flat chisel 240x20 mm SS20
1 flat chisel 240x30 mm SS30
1 flat chisel 240x40 mm SS40
1 groove chisel 240 mm SS50
1 tool box
|
| รหัส |
รายละเอียด |
| RC5150 |
• Chisel insert [mm][in] : 11.01 (0.433)
• Piston Stroke/diam.[mm] : 60/19
• Blows[min-1] : 3000
• Weight[kg] : 1.50
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 200x160x39
• Air Consumption, average [l/min] : 270
• Air Consumption, continuous [l/min] : 400
• Air inlet [inch] : 1/4" IG
• Blow energy : 6
• Noise LpA [dB(A)] : 94.8
• Vibration [m/s2] : 13.2 |
|
| |
|
| |
|
 |
|
เครื่องยิงรีเวทลม รุ่น RC6700 Riveter
|
|
เครื่องยิงรีเวทลม รุ่น RC6700 Riveter
up to 5 mm standard (aluminium/copper)
Handy blind riveters with collection container for torn-off rivet pins. Durable air-hydraulic force multiplying system and hanger for use with balancers.
Model 6700 with 4 different sizes of mouthpieces
Features:
- Insulates against cold at the handle
- rivet size 2,4 / 3,2 / 4,0 / 4,8 / 5,0 mm
|
| รหัส |
รายละเอียด |
| RC6700 |
• Blind Rivet[mm] : 2.4-5.0*
• Mouthpiece Rivet pin[mm]
: 2.0/2.4
: 3.0/3.4
• Force/Stroke[N]/[mm] : 12000
• Weight[kg] : 1.6
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 225x280x100
• Air Consumption average-continuous [l/stroke] : 1.2
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 86.5
• Vibration [m/s2] : 3.5
* = Cu, Al: only for rivets made of copper, aluminium or softer material.
norms applied : noise according to ISO15744, vibration 3-axis according to ISO20643 |
|
| |
|
| |
|
 |
|
เครื่องยิงรีเวทลม รุ่น RC6710 Riveter
|
|
เครื่องยิงรีเวทลม รุ่น RC6710 Riveter
up to 6.4 mm standard (aluminium/copper)
Handy blind riveters with collection container for torn-off rivet pins. Durable air-hydraulic force multiplying system and hanger for use with balancers.
Model 6710 with swivel air connector, 5 different sizes of mouthpieces and 2 additional sets of extra hardened jaws for replacement in order to allow an optimum adaptation to differently thick rivet pins.
Features:
- pneumatic - hydraulic version
- Suitable for copper and aluminium blind rivets of the following sizes: 2,4 / 3,2 / 4,0 / 4,8 / 5,0 / 5,6 / 6,0 / 6,35 / 6,4 mm
|
| รหัส |
รายละเอียด |
| RC6710 |
• Blind Rivet[mm] : 2.4-6.4*
• Mouthpiece Rivet pin[mm]
: 2.0/2.4
: 3.0/4.0/4.4
• Force/Stroke[N]/[mm] : 19000
• Weight[kg] : 2.1
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 255x325x110
• Air Consumption average-continuous [l/stroke] : 1.8
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 64.1
• Vibration [m/s2] : 4.3
* = Cu, Al: only for rivets made of copper, aluminium or softer material.
norms applied : noise according to ISO15744, vibration 3-axis according to ISO20643 |
|
| |
|
| |
|
 |
|
เครื่องยิงรีเวทลม รุ่น RC6715 Riveter
|
|
เครื่องยิงรีเวทลม รุ่น RC6715 Riveter
up to 6.4 mm standard (steel..)
Robust riveter with soft rubber coated handle and easy to maintenance construction. Well suited for an ergonomic work place design with balancer that is attached to the hanger on the tool. With large transparent rivet pin container offering sufficient room for long undisturbed work. With 4 different sizes of mouth pieces and one set of extra hardened jaws for replacement in order to allow an optimum adaptation to differently thick rivet pins.
Features:
Robust pneumatic hydraulic riveting gun for rivets made of copper, aluminium and even steel for a diameter up to 6,4 mm.
- excellent tool for repair and maintenance work
- good for up to 6,4 mm diameter* of steel, copper, aluminium rivets (stroke 16 mm)
- extra small front nozzle allowing access to deep, narrow places
- Height = 295, A = 307mm, B = 26mm, C = 75mm, D = 63mm, E = 100mm
- rubber coated handle for soft grip
- rivet pin collection container on the rear side
- hanger on top for use with spring balancer
- high power pneumatic – hydraulic construction
- 1,8 kg
- Extra small nose
- Rivet sizes: 3,2 / 4,0 / 4,8 / 6,4 mm
* diameter concerns rivet shaft that is put into work piece boring – not for pulling pins
|
| รหัส |
รายละเอียด |
| RC6715 |
• Blind Rivet[mm] : 3.2-6.4**
• Mouthpiece Rivet pin[mm]
: 2.0/2.8
: 3.2/4.5
• Force/Stroke[N]/[mm] : 15000
• Weight[kg] : 1.8
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 300x300x100
• Air Consumption average-continuous [l/stroke] : 1.1
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 77.3
• Vibration [m/s2] : 2.4
** = steel: also for rivets made of steel or softer material.
norms applied : noise according to ISO15744, vibration 3-axis according to ISO20643 |
|
| |
|
| |
|
 |
|
เครื่องยิงรีเวทลม รุ่น RC6703Xi Riveter
|
|
เครื่องยิงรีเวทลม รุ่น RC6703Xi Riveter
with pin removal by suction, up to 4.8 mm steel (standard rivets)
High quality riveters with rivet pin removal by suction (adjustable / can be switched off) and transparent rivet pin collector. Two-finger trigger for easier operation and ON/OFF-switch (for permanently connected tools). Ergonomic due to the large silencer, the cold-insulating handle material and the hanger. Always full stroke and power due to service-friendly hydraulic system. Including 2 additional sets of jaws, 1 additional jaw case, hydraulic oil in a bottle, several keys for adjustment/adaptation, mouthpieces of various sizes, rivet pin extraction tube (only for model 6718Xi).
|
| รหัส |
รายละเอียด |
| RC6703Xi |
• Blind Rivet[mm] : 2.4-4.8**
• Mouthpiece Rivet pin[mm] : 2.4/3.2/4.0
• Force/Stroke[N]/[mm] : 10900/20
• Weight[kg] : 1.5
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 310x287x122
• Air Consumption average-continuous [l/stroke] : 2.1
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 71
• Vibration [m/s2] : 2.3
** = steel: also for rivets made of steel or softer material.
norms applied : noise according to ISO15744, vibration 3-axis according to ISO20643 |
|
| |
|
| |
|
 |
|
เครื่องยิงรีเวทลม รุ่น RC6718Xi Riveter
|
|
เครื่องยิงรีเวทลม รุ่น RC6718Xi Riveter
with pin removal by suction, up to 6.4 mm steel (standard rivets)
High quality riveters with rivet pin removal by suction (adjustable / can be switched off) and transparent rivet pin collector. Two-finger trigger for easier operation and ON/OFF-switch (for permanently connected tools). Ergonomic due to the large silencer, the cold-insulating handle material and the hanger. Always full stroke and power due to service-friendly hydraulic system. Including 2 additional sets of jaws, 1 additional jaw case, hydraulic oil in a bottle, several keys for adjustment/adaptation, mouthpieces of various sizes, rivet pin extraction tube (only for model 6718Xi).
|
| รหัส |
รายละเอียด |
| RC6718Xi |
• Blind Rivet[mm] : 2.4-6.4**
• Mouthpiece Rivet pin[mm] : 2.0/2.4/4.3
• Force/Stroke[N]/[mm] : 15200/26
• Weight[kg] : 1.9
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 310x316x136
• Air Consumption average-continuous [l/stroke] : 4.3
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 76.2
• Vibration [m/s2] : 2.2
** = steel: also for rivets made of steel or softer material.
norms applied : noise according to ISO15744, vibration 3-axis according to ISO20643 |
|
| |
|
| |
|
 |
|
เครื่องยิงรีเวทลม รุ่น RC6720 Riveter
|
|
เครื่องยิงรีเวทลม รุ่น RC6720 Riveter
one tool for 3 types of rivets (standard, BULB, BOLT)
up to 8.0 mm standard - steel
up to 6.4 mm standard - stainless steel, steel ...
6,4 mm special BOLT rivets
Large versatile riveter with soft rubber coated handle and easy to maintenance contruction. Well suited for an ergonomic work place design with balancer that is attached to the hanger on the tool. Equipped with adjustable suction jet and large transparent collection container for torn-off rivet pins. With durable airhydraulic force multiplying system and swivel air
connector. Equipped with 3 different sizes of mouthpieces and one special accessory for 6,4 mm BOLT rivets. Works also on up to 6,4 mm BULB rivets. Including an additional set of hardened jaws.
Features
- robust pneumatic-hydraulic riveter (Duty Level 3) with easy to maintain oil screw
- rubber shock absorber on base plate against accidental bumps
- handle insulated against cold and vibration
- universally swivelling ball connection ผ“ FT on air inlet
- quick shut-off valve on the air inlet
- automatic pin collection by air jet
- very practical for downwards applications and horizontal riveting (can be regulated and switched off and the quick shut-off valve serves for short breaks)
- transparent rivet pin container
- good for normal blind rivets with rivet diameter ๘ 5 / 6 / 6.4 mm (aluminium, steel and stainless steel rivets), with rivet diameter ๘ 8 mm (aluminium and steel rivets)
- good for special heavy duty blind rivets
“BULB” rivets up to 6,4 mm
“BOLT” rivets 6,4 mm using special “BOLT” nozzle (included)
- furthermore applicable with spring balancers due to hanger on top of the riveter (e.g. modell 9313/9321)
|
| รหัส |
รายละเอียด |
| RC6720 |
• Blind Rivet[mm]
: 4.8-6.4***
: 4.8-8.0**
: 6.4"BULB"**
: 6.4"BOLT"**
• Mouthpiece Rivet pin[mm]
: 3.1/4.3/5.0
: 4.2 "BOLT"
• Force/Stroke[N]/[mm] : 17000/23
• Weight[kg] : 1.9
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 300x310x122
• Air Consumption average-continuous [l/stroke] : 2.0
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 66.2
• Vibration [m/s2] : 3.5
** = steel: also for rivets made of steel or softer material.
*** = INOX: also for rivets made of stainless steel or softer material.
”BULB”: high tension special rivets (various material).
”BOLT” : high shear special rivets (various material) |
|
| |
|
| |
|
 |
|
เครื่องเจียรลม รุ่น RC7050RE mini die grinder
|
|
เครื่องเจียรลม รุ่น RC7050RE mini die grinder
rear exhaust 55000 rpm, 3 mm
High-speed precision grinder - pencil style - for engravings or tuning work. Includes collet 3 mm. The supplied silencing exhaust hose system guides air flow away from the use.
Features
Handy, super high speed pen-sized grinder ideal for automotive tuning, small correction work, engraving in particular in small spaces. The speed can be adjusted through the ring at the end of the tool
- 54000 Rpm
- 0.2 kg. Length 134 mm, Height 15 mm
|
| รหัส |
รายละเอียด |
| RC7050RE |
• Collet[mm] : 3
• Power[W] : 150
• Speed [rpm] : 55000
• Weight[kg] : 0.2
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 134x15
• Air Consumption, average [l/min] : 140
• Air Consumption, continuous [l/min] : 180
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 75.2
• Vibration [m/s2] : 2.6 |
|
| |
|
| |
|
 |
|
เครื่องเจียรลม รุ่น RC7010 short die grinder
|
|
เครื่องเจียรลม รุ่น RC7010 short die grinder
rear exhaust 25000 rpm, 6 mm (3 mm also available)
Mini die grinder with 6 mm collet (3 mm collet also available). With rear exhaust in order to attach a silencing exhaust hose system.
Features
- Cold absorbing housing protection
- with a 6 mm collet
- Accessories: various collets
|
| รหัส |
รายละเอียด |
| RC7010 |
• Collet[mm] : 6
• Power[W] : 280
• Speed [rpm] : 25000
• Weight[kg] : 0.4
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 154x40x20
• Air Consumption, average [l/min] : 320
• Air Consumption, continuous [l/min] : 390
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 82.4
• Vibration [m/s2] : 3.6 |
|
| |
|
| |
|
 |
|
เครื่องเจียรลม รุ่น RC7011 die grinder
|
|
เครื่องเจียรลม รุ่น RC7011 die grinder
rear exhaust 26000 rpm, 6 mm (3 mm also available)
Small die grinder with insulated handle and 6 mm collet (3 mm collet also available). With integrated rear exhaust and adapter ring to attach a silencing exhaust hose system (DUS 23).
Features
The light and compact 7011 is ideal for work in small spaces. The special isolation absorbs vibrations as well as giving a comfortable and confident grip.
- very ergonomic cold and vibration insulated handle
- rear exhaust
- 6 mm collet ( 3mm collet available as extra accessory)
- adjustable speed from 0 – 26000 rpm (not locking in positions)
- 0.4 kg, length 155 mm, height 65 mm
|
| รหัส |
รายละเอียด |
| RC7011 |
• Collet[mm] : 6
• Power[W] : 300
• Speed [rpm] : 26000
• Weight[kg] : 0.4
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 155x38x19
• Air Consumption, average [l/min] : 340
• Air Consumption, continuous [l/min] : 415
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 82.7
• Vibration [m/s2] : 9.54 |
|
| |
|
| |
|
 |
|
เครื่องเจียรลม รุ่น RC7045 long die grinder
|
|
เครื่องเจียรลม รุ่น RC7045 long die grinder
rear exhaust 23000 rpm, 6 mm (3 mm also available)
Mini die grinder with 6 mm collet (3 mm collet also available). With rear exhaust in order to attach a silencing exhaust hose system. Long design available for two hand use and difficult to reach spots.
Features
- With an extended anvil
- With a 6 mm collet
- Accessories: various collets
|
| รหัส |
รายละเอียด |
| RC7045 |
• Collet[mm] : 6
• Power[W] : 300
• Speed [rpm] : 23000
• Weight[kg] : 0.55
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 233x34x20
• Air Consumption, average [l/min] : 330
• Air Consumption, continuous [l/min] : 400
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 83.9
• Vibration [m/s2] : 3.3 |
|
| |
|
| |
|
 |
|
เครื่องเจียรลม รุ่น RC7020 die grinder
|
|
เครื่องเจียรลม รุ่น RC7020 die grinder
rear exhaust 20000 rpm, 6 mm (3 mm also available)
Famous tool with 6 mm collet. With easy to control handle form for which a silencing exhaust hose system is available.
Features
- Stronger version of the 7010
- 6 mm collet - standard (3 mm collet and grinding stones for 6 and 3 mm are available as accessory)
- anti-slip grip with square-like shape and rough black color ensures good handling even with greasy or oily fingers.
- rear exhaust to avoid dust to be blown around
- increased power of 400 W for a wide range of applications
- front thread for use in automated devices
- safety lever
|
| รหัส |
รายละเอียด |
| RC7020 |
• Collet[mm] : 6
• Power[W] : 400
• Speed [rpm] : 20000
• Weight[kg] : 0.70
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 175x40x20
• Air Consumption, average [l/min] : 410
• Air Consumption, continuous [l/min] : 520
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 83.4
• Vibration [m/s2] : 3.59 |
|
| |
|
| |
|
 |
|
เครื่องเจียรลม รุ่น RC7025RE short die grinder
|
|
เครื่องเจียรลม รุ่น RC7025RE short die grinder
700 W, 6 mm collet, silencing exhaust hose system
All die grinders versions – collets 6 mm - short construction / long for two handed operation or for work in cylinders, tubes or at difficult to reach spots. All die grinders of this type are equipped with a silencing exhaust hose system.
Features
- Yet another more powerful version with 700 Watt-Motor
- With in / out air hose system
- Accessories: various collets
- Model 7025RE: with 6 mm collet
- Model 7026RE: with 8 mm collet
|
| รหัส |
รายละเอียด |
| RC7025RE |
• Collet[mm] : 6
• Power[W] : 700
• Speed [rpm] : 22000
• Weight[kg] : 1.00
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 184x40x20
• Air Consumption, average [l/min] : 490
• Air Consumption, continuous [l/min] : 600
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 77.9
• Vibration [m/s2] : 2.9 |
|
| |
|
| |
|
 |
|
เครื่องเจียรลม รุ่น RC7026RE short die grinder
|
|
เครื่องเจียรลม รุ่น RC7026RE short die grinder
700 W, 8 mm collet, silencing exhaust hose system
All die grinders versions – collets 8 mm - short construction / long for two handed operation or for work in cylinders, tubes or at difficult to reach spots. All die grinders of this type are equipped with a silencing exhaust hose system.
Features
- Yet another more powerful version with 700 Watt-Motor
- With in / out air hose system
- Accessories: various collets
- Model 7025RE: with 6 mm collet
- Model 7026RE: with 8 mm collet
|
| รหัส |
รายละเอียด |
| RC7026RE |
• Collet[mm] : 8
• Power[W] : 700
• Speed [rpm] : 22000
• Weight[kg] : 1.00
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 184x40x20
• Air Consumption, average [l/min] : 490
• Air Consumption, continuous [l/min] : 600
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 77.9
• Vibration [m/s2] : 2.9 |
|
| |
|
| |
|
 |
|
เครื่องเจียรลม รุ่น RC7027 die grinder
|
|
เครื่องเจียรลม รุ่น RC7027 die grinder
composite - insulated, 6 mm, rear exhaust
Ergonomic handle with good grip due to integrated rubber patches and a lever that vanishes by sinking snugly into housing. With 6 mm precision collet and high grinding speed (3 mm collets available as accessory).
This tool can be equipped with a silencing exhaust hose assembly (DUS21) which keeps cold air, oil and noise away from the user.
|
| รหัส |
รายละเอียด |
| RC7027 |
• Collet[mm] : 6
• Power[W] : 400
• Speed [rpm] : 20000
• Weight[kg] : 0.60
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 175x40x20
• Air Consumption, average [l/min] : 410
• Air Consumption, continuous [l/min] : 520
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 83.4
• Vibration [m/s2] : 3.59 |
|
| |
|
| |
|
 |
|
บล็อกลม 3/8" Impact Wrench รุ่น RC2100
|
|
บล็อกลม 3/8" Impact Wrench รุ่น RC2100
150 Nm max.
3/8" Impact Wrench for confined areas (motorcycles).Butterfly valve for F/R shifting with one hand. Integrated?power regulation valve with 8 positions and 360 องศา swiveling air?inlet.
Features:
- Max. torque 150 Nm
- Forward and reverse directions
- Butterfly trigger and F/R shift
- Single hammer impact mechanism
- Impact power regulator with 8 positions
max. pressure 6.3 bar (90 psi) IG: female thread
norms applied : noise according to ISO15744, vibration 3-axis according to ISO28927-2
|
| รหัส |
รายละเอียด |
| RC2100 |
• Drive : 3/8"
• Torque[Nm] : 105
• Torque, max. [Nm] : 150
• Speed [rpm] : 10000
• Weight [kg] : 1.1
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 165x87x48
• Air Consumption, average [l/min] : 140
• Air Consumption, continuous [l/min] : 370
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Impact system : SH
• Noise LpA : 97.1
• Vibration [m/s2;] : 4.57
|
|
| |
|
| |
|
 |
|
เครื่องเจียรลม รุ่น RC7060RE long die grinder
|
|
เครื่องเจียรลม รุ่น RC7060RE long die grinder
700 W, 6 mm collet, silencing exhaust hose system
All die grinders versions – collets 6 mm - short construction / long for two handed operation or for work in cylinders, tubes or at difficult to reach spots. All die grinders of this type are equipped with a silencing exhaust hose system.
Features
- Powerful DIE Grinder with a 700 Watt-Motor
- Extended length design
- With in / out air hose system
- Accessories: various collets
- Model 7060RE: with 6 mm collet
- Model 7065RE: with 8 mm collet
|
| รหัส |
รายละเอียด |
| RC7060RE |
• Collet[mm] : 6
• Power[W] : 700
• Speed [rpm] : 18000
• Weight[kg] : 1.20
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 340x43x35
• Air Consumption, average [l/min] : 490
• Air Consumption, continuous [l/min] : 600
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 73.7
• Vibration [m/s2] : 3.11 |
|
| |
|
| |
|
 |
|
เครื่องเจียรลม รุ่น RC7065RE long die grinder
|
|
เครื่องเจียรลม รุ่น RC7065RE long die grinder
700 W, 8 mm collet, silencing exhaust hose system
All die grinders versions – collets 8 mm - short construction / long for two handed operation or for work in cylinders, tubes or at difficult to reach spots. All die grinders of this type are equipped with a silencing exhaust hose system.
Features
- Powerful DIE Grinder with a 700 Watt-Motor
- Extended length design
- With in / out air hose system
- Accessories: various collets
- Model 7060RE: with 6 mm collet
- Model 7065RE: with 8 mm collet
|
| รหัส |
รายละเอียด |
| RC7065RE |
• Collet[mm] : 8
• Power[W] : 700
• Speed [rpm] : 18000
• Weight[kg] : 1.20
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 340x43x35
• Air Consumption, average [l/min] : 490
• Air Consumption, continuous [l/min] : 600
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 73.7
• Vibration [m/s2] : 3.61 |
|
| |
|
| |
|
 |
|
เครื่องเจียรลม รุ่น RC7080 die grinder
|
|
เครื่องเจียรลม รุ่น RC7080 die grinder
700 W, 6 mm collet, exhaust downwards
Long type large die grinder with 6 mm collet and downward exhaust (mid tool sideways). This design allows two handed working styles for rough grinding applications.
Features
- Powerful grinder with a 700 Watt-Motor
- Exhaust on the side, blowns the air away from the user and workpiece
- Thin design
- With 6mm collet
- Accessories: various collets
|
| รหัส |
รายละเอียด |
| RC7080 |
• Collet[mm] : 6
• Power[W] : 700
• Speed [rpm] : 18000
• Weight[kg] : 2.00
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 438x53x30
• Air Consumption, average [l/min] : 510
• Air Consumption, continuous [l/min] : 680
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 84.9
• Vibration [m/s2] : 2.38 |
|
| |
|
| |
|
 |
|
เครื่องขัดกระดาษทรายสายพาน รุ่น RC7155
|
|
เครื่องขัดกระดาษทรายสายพาน รุ่น RC7155
Small belt sander including three sanding belts
for industrial use rotatable handle specifically for working in tight spaces no lateral overhang i.e. very well to grind in corners by additional handle trouble performing and adjusting the unit with bracelet quick-change clamping automatic
Sanding belt 10 x 330 mm
|
| รหัส |
รายละเอียด |
| RC7155 |
• Width of Adrasives [mm]: 10
• Min. Lenght of Piece of Abrasive [mm] : 330
• Speed[Rpm] : 18000
• Weight [kg] : 0.8
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 285x37x22
• Air Consumption, average [l/min] : 400
• Air Consumption, continuous [l/min] : 520
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Duty Level : 2
• Noise LpA [dB(A)]: 79.5
• Vibration [m/s2;] : 2.5 |
|
| |
|
| |
|
 |
|
เครื่องขัดกระดาษทรายสายพาน รุ่น RC7156
|
|
เครื่องขัดกระดาษทรายสายพาน รุ่น RC7156
|
| รหัส |
รายละเอียด |
| RC7156 |
• Width of Adrasives [mm]: 20
• Min. Lenght of Piece of Abrasive [mm] : 520
• Speed[Rpm] : 17000
• Weight [kg] : 1.15
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 353x44x35x22
• Air Consumption, average [l/min] : 400
• Air Consumption, continuous [l/min] : 520
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Duty Level : 2
• Noise LpA [dB(A)]: 83.2
• Vibration [m/s2;] : 2.4 |
|
| |
|
| |
|
 |
|
เครื่องขัดกระดาษทรายสายพาน รุ่น RC7157
|
|
เครื่องขัดกระดาษทรายสายพาน รุ่น RC7157
|
| รหัส |
รายละเอียด |
| RC7157 |
• Width of Adrasives [mm]: 30
• Min. Lenght of Piece of Abrasive [mm] : 540
• Speed[Rpm] : 13000
• Weight [kg] : 2.2
• Inner Hose Diameter : 8 mm
• Dimension a x b x c [mm] : 420x78x45
• Air Consumption, average [l/min] : 530
• Air Consumption, continuous [l/min] : 660
• Air inlet [inch] (FT-female, MT-male) : 1/4" IG
• Duty Level : 2
• Noise LpA [dB(A)]: 91.6
• Vibration [m/s2;] : 4.6 |
|
| |
|
| |
|
 |
|
Engraver with 1 engraving needle รุ่น RC5030
|
|
Engraver with 1 engraving needle รุ่น RC5030
reaction-free, engraves also on steel
Engraving pen with very hard needle even works on steel. Operates like a mini-hammer without giving reactions sideways. Anti-slip structured handle and start valve ring at the end of the tool. Extra hard replacement needles available as accessory.
|
| รหัส |
รายละเอียด |
| RC5030 |
• Chisel insert[mm][inch] : 3.2
• Piston Stroke/diam.[mm] : 0.05
• Blows[min-1] : 10000
• Weight[kg] : 0.20
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 160x14.5
• Air Consumption, average [l/min] : 4
• Air Consumption, continuous [l/min] : 5
• Air inlet [inch] : 1/4" AG
• Duty level : 2
• Noise LpA [dB(A)] : 70.7
• Vibration [m/s2] : 3.8 |
|
| |
|
| |
|
 |
|
Scraper and chisel hammer รุ่น RC5550
|
|
Scraper and chisel hammer รุ่น RC5550
one piece, long, for work on floor
with long robust one-piece handle bar (1080 mm without chisel)
Scraper and chisel hammer for the removal of various surfaces and layers like tiles and bitumen from tanks, floors and walls. Chisel inserts are available: from pointed chisels up to 120 mm flat chisels. The tool is available in two versions, long version for working on floors and a two-piece short version for working horizontally at shorter distance. (chisels not included in delivery)
Features:
- For fast and cleanremoval of carpet glue, concrete and plaster residues, tiles, PVC floor plate, coatings, etc.
- Model 5550 one piece handle, approx.1,2 m
- Delivered without chisel
|
| รหัส |
รายละเอียด |
| RC5550 |
• Chisel insert[mm][inch] : 14.71 (0.579)
• Piston Stroke/diam.[mm] : 40
• Blows[min-1] : 2200
• Weight[kg] : 5.75
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 1080x62
• Air Consumption, average [l/min] : 100
• Air Consumption, continuous [l/min] : 160
• Air inlet [inch] : 1/4" IG
• Duty level : 2
• Noise LpA [dB(A)] : 87.5
• Vibration [m/s2] : 15.9 |
|
| |
|
| |
|
 |
|
Scraper and chisel hammer รุ่น RC5551
|
|
Scraper and chisel hammer รุ่น RC5551
one piece, long, for work on floor
with separable handle bar (475 - 1080 mm without chisel)
Scraper and chisel hammer for the removal of various surfaces and layers like tiles and bitumen from tanks, floors and walls. Chisel inserts are available: from pointed chisels up to 120 mm flat chisels. The tool is available in two versions, long version for working on floors and a two-piece short version for working horizontally at shorter distance. (chisels not included in delivery)
Features:
- For?fast and clean?removal of carpet glue, concrete and plaster residues, tiles, PVC floor plate, coatings, etc.
- Model 5551 partionioned handle for work in limited spaces
- Delivered without chisel
|
| รหัส |
รายละเอียด |
| RC5551 |
• Chisel insert[mm][inch] : 14.71 (0.579)
• Piston Stroke/diam.[mm] : 40
• Blows[min-1] : 2200
• Weight[kg] : 4.05 / 5.80
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 475x62 / 1080x62
• Air Consumption, average [l/min] : 100
• Air Consumption, continuous [l/min] : 160
• Air inlet [inch] : 1/4" IG
• Duty level : 2
• Noise LpA [dB(A)] : 94
• Vibration [m/s2] : 22.5 |
|
| |
|
| |
|
 |
|
Scraper with 2 scraper blades รุ่น RC5610 /RC5607 / RC5602
|
|
Scraper with 2 scraper blades รุ่น RC5610
combination
Model RC5610 : Scraper with 2 scraper blades
Model RC5607 : Scraper chisel 30 mm, angled
Model RC5602 : Flat chisel 20 mm.
High quality straight chisel hammer equipped with angled scraper chisel and needle scaler set with 19 needles, size 3 mm.
Features:
- combined tool - scraper / needle scaler
- for coarse derusting and fine scaling to derust details with one tool
- activation by?lever
- includes offset scaling chisel, 30 mm width model 5607 (8951011499)
- 19x 3mm needles
- not suitable for thin sheet metal
|
| รหัส |
รายละเอียด |
| RC5610 |
• Scraper with 2 scraper blades |
| RC5607 |
• Scraper chisel 30 mm, angled |
| RC5602 |
• Flat chisel 20 mm. |
|
| |
|
| |
|
 |
|
เลื่อยลม mini saw รุ่น RC6040RE
|
|
เลื่อยลม mini saw รุ่น RC6040RE
145 mm
Mini-Saw, good for working in confined areas, on dash boards and door panels, in the boot, on bumpers and for building in sun roofs. With rubber cover on the handle to insulate against cold. Equipped with a hanger for use with balancers. The tool has a rear exhaust and is delivered with a silencing exhaust hose system (DUS23).
Features:
- for work in confined areas
- ideal for use on car body parts and additional fixtures (car dashboards, side carpetings, rear parcel shelfs, bumpers and assembly of sun roofs)
- less tiring work
- weight 0.5 kg
- cold insulation cover on handle
- hanger for balancer
- air outlet on rear end
- duplex exhaust-hose-system DUS34 (500 mm) directs the air away from body and working place
- safety trigger against accidental start-up
- stop position bail for adjustable cutting depth
|
| รหัส |
รายละเอียด |
| RC6040RE |
• Saw blades[teeth/inch] : 14/18/24/32
• Stroke[mm] : 5
• Blow(speed)[min-1] : 5000
• Weight[kg] : 0.5
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 145x30
• Air Consumption, average [l/min] : 140
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 74
• Vibration [m/s2] : 5.9 |
|
| |
|
| |
|
 |
|
เลื่อยลม air saw รุ่น RC6050
|
|
เลื่อยลม air saw รุ่น RC6050
easy exchange of blades, rear exhaust
Fast and handy air saw for sheet metals with insulated handle and exhaust guided to the rear side. Ideally suited for precise cutting of car body parts, profiles and sun roofs. 10 mm stroke.
Features:
- ideal for all car body and sheet metal work
- Clean and high performance cutting for sheet metal profiles, silencers, frames, sun roof installations etc.
- Cold insulated handle
- Max. stroke 10 mm
- For sheet metal up to max. 5 mm
|
| รหัส |
รายละเอียด |
| RC6050 |
• Saw blades[teeth/inch] : 14/18/24/32
• Stroke[mm] : 10
• Blow(speed)[min-1] : 9500
• Weight[kg] : 0.65
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 262x38
• Air Consumption, average [l/min] : 220
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 79.9
• Vibration [m/s2] : 12.57 |
|
| |
|
| |
|
 |
|
เลื่อยลมชุด air saw set รุ่น RC6051
|
|
เลื่อยลมชุด air saw set รุ่น RC6051
easy exchange of blades, rear exhaust
Fast and handy air saw for sheet metals with insulated handle and exhaust guided to the rear side. Ideally suited for precise cutting of car body parts, profiles and sun roofs. 10 mm stroke.
Features:
- ideal for all car body and sheet metal work
- Clean and high performance cutting for sheet metal profiles, silencers, frames, sun roof installations etc.
- Cold insulated handle
- Max. stroke 10 mm
- For sheet metal up to max. 5 mm
Model RC6051 including:
1 air saw RC6050
5 saw blades, fine (32 teeth/inch) 8951011514
5 saw blades, medium fine (24 teeth/inch) 8951011515
1 swivelling connector1 DG1
1 mini-oiler G1K
2 hex. wrench for changing saw blades
and adjusting the stop position bail.
1 tool box
|
| รหัส |
รายละเอียด |
| RC6051 |
• Saw blades[teeth/inch] : 14/18/24/32
• Stroke[mm] : 10
• Blow(speed)[min-1] : 9500
• Weight[kg] : 0.65
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 262x38
• Air Consumption, average [l/min] : 220
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 79.9
• Vibration [m/s2] : 12.57 |
|
| |
|
| |
|
 |
|
เลื่อยลม low vibration saw รุ่น RC6067
|
|
เลื่อยลม low vibration saw รุ่น RC6067
TOP model, low vibration and composite
Elegantly shaped, powerful air saw with composite handle and rear exhaust. (With possibility to connect a silencing exhaust hose system DUS31.) Very well suited to cut through profiles and multiple-layer sheet metals - also with sealants or glue in between. Using our long RODCRAFT saw blades larger tubes and profiles can even be cut in one (good for confined areas). The elegant form and its anti-slip-coated handle make this saw perfect to work with in any position. 10000 strokes/min. When using a file adapter and files, the tool can also be converted into an air file.
Features:
- Universally applicable
- extra low-vibration and powerful with high speed
- also good for multiple layers of sheet metal, ideal for curves (depends on type of saw blades used)
- robust composite housing with new handle shape
- insulates against cold and vibration
- stop position bail for adjustable cutting depth and prolonged durability of the blade when used on sheet metal
- with safety lever
- exhaust to the rear
- low motor noise and air consumption
- useable with a duplex-hose-system DUS-31 (article no. 852219)
|
| รหัส |
รายละเอียด |
| RC6067 |
• Saw blades[teeth/inch] : 14/18/24/32
• Stroke[mm] : 10
• Blow(speed)[min-1] : 10000
• Weight[kg] : 0.51
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 265x64x55
• Air Consumption, average [l/min] : 150
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 79.9
• Vibration [m/s2] : 6.32 |
|
| |
|
| |
|
 |
|
เลื่อยลมชุด low vibration saw set รุ่น RC6068
|
|
เลื่อยลมชุด low vibration saw set รุ่น RC6068
TOP model, low vibration and composite
Elegantly shaped, powerful air saw with composite handle and rear exhaust. (With possibility to connect a silencing exhaust hose system DUS31.) Very well suited to cut through profiles and multiple-layer sheet metals - also with sealants or glue in between. Using our long RODCRAFT saw blades larger tubes and profiles can even be cut in one (good for confined areas). The elegant form and its anti-slip-coated handle make this saw perfect to work with in any position. 10000 strokes/min. When using a file adapter and files, the tool can also be converted into an air file.
Features:
- Universally applicable
- extra low-vibration and powerful with high speed
- also good for multiple layers of sheet metal, ideal for curves (depends on type of saw blades used)
- robust composite housing with new handle shape
- insulates against cold and vibration
- stop position bail for adjustable cutting depth and prolonged durability of the blade when used on sheet metal
- with safety lever
- exhaust to the rear
- low motor noise and air consumption
- useable with a duplex-hose-system DUS-31 (article no. 852219)
Model RC6068 including:
1 air saw RC6067
1,5m silencing exhaust hose system DUS31
5 saw blade, fine (32 teeth/inch) 8951011514
5 saw blade, medium fine (24 teeth/inch) 8951011515
5 saw blade, medium (18 teeth/inch) 8951011520
1 swivelling connector DG1
1 hex. wrench for changing saw blades
1 tool box
|
| รหัส |
รายละเอียด |
| RC6068 |
• Saw blades[teeth/inch] : 14/18/24/32
• Stroke[mm] : 10
• Blow(speed)[min-1] : 10000
• Weight[kg] : 0.51
• Inner hose diameter [mm] : 8
• Dimension a x b x c [mm] : 265x64x55
• Air Consumption, average [l/min] : 150
• Air inlet [inch] : 1/4" IG
• Noise LpA [dB(A)] : 79.9
• Vibration [m/s2] : 6.32 |
|
| |
|
| |
|
 |
|
ประแจปอนด์ [Torque Wrenches] ยี่ห้อ RODCRAFT รุ่น DMS030
|
|
ประแจปอนด์ [Torque Wrenches] ยี่ห้อ RODCRAFT รุ่น DMS030
Features :
- With fast and easy-to-read dual scale in a plastic handle (Nm and ft-lbs.)
- Accurate torque adjustment between 5 - 30 Nm
- imple and continuous adjustment at the handle end
- selected torque setting can be locked
- Long service life thanks to high quality, solid and robust ratchet mechanism
- Practical right / left reversal in the ratchet head
- Torque wrench is calibrated at the factory and to an accuracy of + - 4% tested!
- Supplied in plastic case
|
| รหัส |
รายละเอียด |
| DMS030 |
• Range (Nm) : 5-30 Nm
• Square Drive Size : 1/4" |
|
| |
|
| |
|
 |
|
ประแจปอนด์ [Torque Wrenches] ยี่ห้อ RODCRAFT รุ่น DMS160
|
|
ประแจปอนด์ [Torque Wrenches] ยี่ห้อ RODCRAFT รุ่น DMS160
Features :
- With fast and easy-to-read dual scale in a plastic handle (Nm and ft-lbs.)
- Accurate torque adjustment between 5 - 30 Nm
- imple and continuous adjustment at the handle end
- selected torque setting can be locked
- Long service life thanks to high quality, solid and robust ratchet mechanism
- Practical right / left reversal in the ratchet head
- Torque wrench is calibrated at the factory and to an accuracy of + - 4% tested!
- Supplied in plastic case
|
| รหัส |
รายละเอียด |
| DMS160 |
• Range (Nm) : 10-60 Nm
• Square Drive Size : 3/8" |
|
| |
|
| |
|
 |
|
ประแจปอนด์ [Torque Wrenches] ยี่ห้อ RODCRAFT รุ่น DMS221
|
|
ประแจปอนด์ [Torque Wrenches] ยี่ห้อ RODCRAFT รุ่น DMS221
Features :
- With fast and easy-to-read dual scale in a plastic handle (Nm and ft-lbs.)
- Accurate torque adjustment between 5 - 30 Nm
- imple and continuous adjustment at the handle end
- selected torque setting can be locked
- Long service life thanks to high quality, solid and robust ratchet mechanism
- Practical right / left reversal in the ratchet head
- Torque wrench is calibrated at the factory and to an accuracy of + - 4% tested!
- Supplied in plastic case
|
| รหัส |
รายละเอียด |
| DMS221 |
• Range (Nm) : 40-200 Nm , 30-150 ft.lbs.
• Square Drive Size : 1/2" |
|
| |
|
| |
|
 |
|
ประแจปอนด์ [Torque Wrenches] ยี่ห้อ RODCRAFT รุ่น DMS370
|
|
ประแจปอนด์ [Torque Wrenches] ยี่ห้อ RODCRAFT รุ่น DMS370
Features :
- With fast and easy-to-read dual scale in a plastic handle (Nm and ft-lbs.)
- Accurate torque adjustment between 5 - 30 Nm
- imple and continuous adjustment at the handle end
- selected torque setting can be locked
- Long service life thanks to high quality, solid and robust ratchet mechanism
- Practical right / left reversal in the ratchet head
- Torque wrench is calibrated at the factory and to an accuracy of + - 4% tested!
- Supplied in plastic case
|
| รหัส |
รายละเอียด |
| DMS370 |
• Range (Nm) : 140-700 Nm
• Square Drive Size : 3/4" |
|
| |
|
| |
|
 |
|
ประแจปอนด์ [Torque Wrenches] ยี่ห้อ RODCRAFT รุ่น DMS490
|
|
ประแจปอนด์ [Torque Wrenches] ยี่ห้อ RODCRAFT รุ่น DMS490
Features :
- With fast and easy-to-read dual scale in a plastic handle (Nm and ft-lbs.)
- Accurate torque adjustment between 5 - 30 Nm
- imple and continuous adjustment at the handle end
- selected torque setting can be locked
- Long service life thanks to high quality, solid and robust ratchet mechanism
- Practical right / left reversal in the ratchet head
- Torque wrench is calibrated at the factory and to an accuracy of + - 4% tested!
- Supplied in plastic case
|
| รหัส |
รายละเอียด |
| DMS490 |
• Range (Nm) : 140-980 Nm
• Square Drive Size : 1" |
|
